3D Colored Carbon Fiber Vinyl Wrap Film Bubble Free Slideable

Product Name: Slidable 3D Colored Carbon Fiber Car Vinyl Wrap Film Bubble Free

Product Description:

1. Carbon fiber vinyl wrap film describes the automotive aftermarket practice of completely or partially covering a vehicle's original paint with a vinyl wrap of a different color, and sometimes the same color with a differing finish like a gloss, matte, or clear protective layer.
2. All our Carbon Fibers are self adhesive with a bubble-free membrane for a fast and bubble free application! (Ready to use out of the box, no liquids required!).

Product Specfications:

Product Features:

1. Excellent conformability around curves and recesses
2. Good conformability to irregular substrates
3. Easy apply feature helps eliminate wrinkles and bubbles during application
4. Very high gloss semi-conformable film
5. Unique patented adhesive technology

Advantages of Applying Car Wrap Film:

1. Prevents damage from overheating. Provided you choose a model resistant to ultraviolet radiation or something that reflects light well, your car takes in less heat. If used on the hood, it can keep the scorching sun off of your car’s essential components.
2. Prevents damage from overheating. Provided you choose a model resistant to ultraviolet radiation or something that reflects light well, your car takes in less heat. If used on the hood, it can keep the scorching sun off of your car’s essential components.
3. Professional results. Unlike many vehicular accessories, this is something even an experienced DIYer can take on. Car vinyl wraps are made to be user-friendly and intuitive, with the material responding to heat and doing a lot of the work for you. Provided you take your time during setup, it’s shocking how smooth and stylish a newly-wrapped car can be.
4. Affordable improvement. Getting your own car vinyl wrap can save you some expensive shop time. Though the project isn’t complex, it is time-consuming, and anyone who’s been to a mechanic knows that those hours can add up. Thankfully, vinyl wraps are easy to get in place, have evolved a lot since Milton Hershey invented them in 1900.
5. Useful on exterior and interior. When you think of car vinyl wrap, you might think of a complete exterior overhaul. But vinyl has applications inside your car as well. If you cut it to size and pick a suitable color, it can really jazz up your dashboard, accent your radio, or make your doors more stylish. Yes, vinyl wraps are functional, but they also lend themselves to artistic applications.

• HOW TO REMOVE VINYL FROM YOUR CAR

1. Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.
2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.
3.Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.
4.Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

Product Application:
￭ Buses
￭ Vehicle advertising
￭ Trucks
￭ Cars & Vans

FAQs:

​

• How long does vinyl wrap last?

Depending on the quality of the wrap, type of vinyl wrap, care taken during installing, care after installation, and environmental factors, car wraps can last from three to ten years.

• Can I put my wrapped car through a car wash?

Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.

• Is there anything you can’t wrap?

Vinyl car wrap sticks best to smooth factory paints and smooth rigid plastic surfaces. It won’t bond well, if at all, to poor paint jobs, orange peel, deep scratches, gouges, rust, chipped paint, flaking paint, textured surfaces, rubber, ABS plastics, porous or spongy surfaces.

Based in Guangzhou City, China, Guangzhou City Shenghui Optical Technology Co., Ltd is a professional adhesive coating manufacturing company since 2002. We manufacture premium vinyl graphic films, digital media, laminating films, and reflective products used in signage, graphics, digital printing, screen printing, and traffic and safety applications. Additional Guangzhou ShengHui Optical markets a wide range of industrial tapes for applications ranging from the solar industry to point of purchase applications. The company’s distribution network spans the United States, Canada, Latin America, and the Caribbean.

Guangzhou City Shenghui Optical Technology Co., Ltd is one of the most modern of its kind in China and ensures both high-quality products and rapid turn-over time for delivery. This facility completed an expansion in 2006 that included approximately 160,000 square meters of additional storage space for finished goods, and close to 50,000 square meters of ground-floor space for packaging and shipping. In addition to the plant expansion, capital investment in an adhesive coating line and automated roll retrieval system brought the total capital investment project to RMB 20 million.