Heat Tolerance Slidable Ultra High Gloss Car Wrap Khaki Green Automotive Vinyl Wrap

Product Name: Slidable Ultra Gloss Khaki Green Vinyl Wrap Automotive Vinyl Wrap 60µM

Heat Tolerance Slidable Ultra Gloss Khaki Green Vinyl Wrap Automotive Vinyl Wrap

Product Description:

1. Car wrap film is a series of vinyl decals that are placed over the body panels of the vehicle, letting you drastically change its appearance. The design options include a standard glossy color, gradient color, matte finish, chrome metallic color, and full-on graphics treatments.
2. DIY CAR STICKER:The sticker makes your car look more distinctive and more cool, so that others always keep their eyes on your car.DIY your own personalized car to make your car more fashionable.

Product Specfications:

Product Features:

1. Combines a colored film and protective layer in one convenient construction with fewer seams
2. Easy apply feature helps eliminate wrinkles and bubbles during application
3. Excellent conformability around curves and recesses
4. Outstanding durability and outdoor performance
5. Good conformability to irregular substrates
6. Unique patented adhesive technology

Advantages of Applying Car Wrap Film:

1. Many of the styles can not be reproduced by paint.
2. You can restore the car to its original color by removing the wrap.
3. Adds to the resell value of your car. When you remove it, your paint is in the same condition as on the day it was wrapped. Thus adding to the resale value by having flawless paint on your car. A repainted car normally decreases the value of your vehicle due to concerns over possible previous accident(s).
4. Vinyl car wraps wear as well as, or better than paint – when properly cared for. Think of it like a skin for your laptop or a silicon cover for your phone. The vinyl can take a beating protecting the vehicle’s paint underneath.
5. Vinyl car wraps come in many colors and can have matte, semi-gloss, gloss, brushed steel, carbon fiber, matte metallic, chrome, and even leather-like finishes.
6. Warranties and/or lease agreements remain valid. Painting can void warranties and is not a lease option.
7. Expensive, color-matching paint fees are unnecessary for scratches or accident vehicles; just re-wrap the section that needs repair.
8. The cost for a vinyl vehicle wrap is considerably less (nearly half) than a comparable paint job.
9. It’s difficult to tell it’s not painted.

Product Application:

1. Emergency Vehicles
2. Trucks
3. Trailers
4. Buses

FAQs

1 . Will car wrap damage my car’s paint?

Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.

2 . How Do You Maintain a Wrapped Car?

The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.

3 . How long does vinyl wrap last?

Depending on the quality of the wrap, type of vinyl wrap, care taken during installing, care for installation, and environmental factors, car wraps can last from three to ten years.

4 . Can I put my wrapped car through a car wash?

Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.

• How to remove vinyl from your car?

1. Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

3. Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.

4. Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.

Based in Guangzhou City, China, Guangzhou City Shenghui Optical Technology Co., Ltd is a professional adhesive coating manufacturing company since 2002. We manufacture premium vinyl graphic films, digital media, laminating films, and reflective products used in signage, graphics, digital printing, screen printing, and traffic and safety applications. Additional Guangzhou ShengHui Optical markets a wide range of industrial tapes for applications ranging from the solar industry to point of purchase applications. The company’s distribution network spans the United States, Canada, Latin America, and the Caribbean.

Guangzhou City Shenghui Optical Technology Co., Ltd is one of the most modern of its kind in China and ensures both high-quality products and rapid turn-over time for delivery. This facility completed an expansion in 2006 that included approximately 160,000 square meters of additional storage space for finished goods, and close to 50,000 square meters of ground-floor space for packaging and shipping. In addition to the plant expansion, capital investment in an adhesive coating line and automated roll retrieval system brought the total capital investment project to RMB 20 million.