Product Details
Product Name: Bubble Free Slideable Tungsten Black Chrome Car Wrap Film
Product Description:
Car wrap film is a series of vinyl decals that are placed over the
body panels of the vehicle, letting you drastically change its
appearance. The design options include a standard glossy color,
gradient color, matte finish, chrome metallic color, and full-on
graphics treatments.
Product Specfications:
1. Face Film | Type: | Polymeric Calendered Vinyl Film | Thickness: | 120 µm |
Surface Finish: | Chrome | Color: | Silver Mirror |
2. Adhesive | Type: | Clear Removable Acrylic Adhesive |
Thickness: | 30 µm | Color: | Clear |
3. Liner | Type: | Air-Egress PE-coated Paper Liner | Thickness: | 140gsm |
4. Max Durability | Up to 5 years |
5. Product Size | Width | Length |
(metric/m) | (Imperial/inch) | (Metric/m) | (Imperial/yard) |
1.27 | 50 | 18 | 20 |
1.52 | 60 | 23 | 25 |
Notice: There is a Minimum Order Requirement for Special Product
Size.
|
Product Application:
■ Emergency Vehicles
■ Trailers
■ Vehicle advertising
Advantages of Applying Car Wrap Film:
- Useful on exterior and interior. When you think of car vinyl wrap,
you might think of a complete exterior overhaul. But vinyl has
applications inside your car as well. If you cut it to size and
pick a suitable color, it can really jazz up your dashboard, accent
your radio, or make your doors more stylish. Yes, vinyl wraps are
functional, but they also lend themselves to artistic applications.
- Professional results. Unlike many vehicular accessories, this is
something even an experienced DIYer can take on. Car vinyl wraps
are made to be user-friendly and intuitive, with the material
responding to heat and doing a lot of the work for you. Provided
you take your time during setup, it’s shocking how smooth and
stylish a newly-wrapped car can be.
- Safe to use on any paint. The type of adhesive that works with
vinyl wraps is heat- (or pressure-) activated. It enables you to
slide it into position during installation. The glue is gentle on
your car’s surface, even after it dries. Vinyl wraps are easy to
remove and won’t harm your car’s paint. They are, however,
single-use items. Once removed, you can’t reapply it.
- Affordable improvement. Getting your own car vinyl wrap can save
you some expensive shop time. Though the project isn’t complex, it
is time-consuming, and anyone who’s been to a mechanic knows that
those hours can add up. Thankfully, vinyl wraps are easy to get in
place, have evolved a lot since Milton Hershey invented them in
1900.
- Protects the car’s paint. In terms of functional benefits, the wrap
is literally a physical barrier that protects the paint on your
car. The vinyl is relatively thin, yes, but due to the flexible
nature of the polymer, it resists low-force scratches well. It
keeps your paint out of the sun and helps it last longer overall.
FAQs:
- Can I put my wrapped car through a car wash?
Hand washing is best for vinyl wraps, but brushless or touchless
car washes can be just as safe. You can even use a pressure washer
if you’re gentle.
- Will car wrap damage my car’s paint?
Actually, car wrap can protect your paint because it blocks
damaging ultraviolet light. When you remove it, the original finish
will be intact.
- How long does vinyl wrap last?
Depending on the quality of the wrap, type of vinyl wrap, care
taken during installing, care for installation, and environmental
factors, car wraps can last from three to ten years.
- How to remove vinyl from your car?
1. Use the heat gun to evenly heat the surface of the wrap to about
120 °F (50 °C). This will loosen the adhesive so you can pull it
off. Use a non-contact infrared thermometer to confirm you aren’t
overheating, which can lead to excessive adhesive residue left on
the surface.
2. Finally, use Turtle Wax Label & Sticker Remover or Bug &
Tar Remover to remove any adhesive residue from the surface of the
panel.
3.Use your fingernail or plastic scraper to pull the wrap from the
edges of the entire panel. It’s going to look gnarly, but it’ll all
be gone in a few minutes.
4.Pull the wrap away from the edges at a steep angle, pulling the
wrap back on itself at 15 to 20 degrees. When the wrap gets hard to
pull, reheat and start pulling again.
Product Features:
- UV, temperature, humidity, and salt-spray resistance
- Combines a colored film and protective layer in one convenient
construction with fewer seam
- Outstanding durability and outdoor performance
- Very high gloss semi-conformable film
- Unique patented adhesive technology
- Good conformability to irregular substrates
Company Profile
Based in Guangzhou City, China, Guangzhou City Shenghui Optical
Technology Co., Ltd is a professional adhesive coating
manufacturing company since 2002. We manufacture premium vinyl
graphic films, digital media, laminating films, and reflective
products used in signage, graphics, digital printing, screen
printing, and traffic and safety applications. Additional Guangzhou
ShengHui Optical markets a wide range of industrial tapes for
applications ranging from the solar industry to point of purchase
applications. The company’s distribution network spans the United
States, Canada, Latin America, and the Caribbean.
Guangzhou City Shenghui Optical Technology Co., Ltd is one of the
most modern of its kind in China and ensures both high-quality
products and rapid turn-over time for delivery. This facility
completed an expansion in 2006 that included approximately 160,000
square meters of additional storage space for finished goods, and
close to 50,000 square meters of ground-floor space for packaging
and shipping. In addition to the plant expansion, capital
investment in an adhesive coating line and automated roll retrieval
system brought the total capital investment project to RMB 20
million.