9.5mm 12mm 15mm Aluminum Rod Continuous Casting Machine And Rolling
Brand Name:Wiremac
Certification:SGS, CE, UL
Model Number:JX1600/9.5(12,15)
Minimum Order Quantity:1 Set
Delivery Time:90 days
Payment Terms:L/C, T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Dongguan Guangdong China
Address:
No.48, Baihao Industrial Street, Houjie Town, Dongguan City, Guangdong Province, China
Supplier`s last login times:
within 27 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
9.5mm 12mm 15mm Aluminum Rod Continuous Casting And Rolling Machine
Introduction
I. Equipment use and performance
The equipment adopts continuous casting and rolling process φ 15, φ 12, φ 9.5mm conductive aluminum rods of three specifications, including φ 15mm production adopts 11 racks, φ 12mm production adopts 13 racks, and φ 9.5mm production adopts 15 racks.
II. Production process
The qualified aluminum liquid is injected into the horizontal casting continuous caster through the launder and continuously cast to 2340mm² trapezoidal ingots. After traction, it is sheared with rolling shears to remove the waste ingots that do not meet the requirements of rolling. After entering the continuous rolling mill through the feeder for rolling, the rods are pulled out. After entering the oil-free draft tube and the rod winding device, the aluminum rods fall into the double basket rod take-up machine to form a plum blossom winding coil.
Technical Parameters
1. Furnace group
| No. | Equipment Name | Component | Specification | Quantity (set) | Remark |
1 | Melting furnace | Vertical fast energy saving aluminum melting furnace | 5T/h | 1 | / |
| Hot blast furnace liner for vertical furnace | φ1300×1500 | 1 | / | ||
| Vertical four guide rail tipping bucket feeder | 1.25T | 1 | / | ||
| Design and construction of furnace top steel structure operation platform | 25m2 | 1 | Materials: provided by the customer | ||
| Automatic combustion system of smelting furnace | 1.6 million kcal | 2 | / | ||
2 | Holding furnace | Circular holding furnace | 8T | 2 | / |
| Air preheater for holding furnace | 1 million kcal | 2 | / | ||
| Automatic combustion system of holding furnace | 1 million kcal | 2 | / | ||
| Pouring launder | Melting insulation casting | 1 | / | ||
| Magnetic window at the bottom of holding furnace | Optional | 2 | If the aluminum alloy rod is to be produced in the future, it is recommended to configure it, because there is no way to change or increase it in the later stage. Only when the magnetic window is configured can the magnetic stirrer work. | ||
3 | Smoke exhaust | Main smoke exhaust of Furnace Group | φ640 | 1 | The smoke pipe and hood are provided by the customer and designed by the manufacturer |
| 4 | Filter box | Ceramic filter box | 500*500 | 1 | / |
2. Aluminum rod continuous casting and rolling production line
| NO. | Name | Specifications | Quantity (set) |
| A | JX1600/9.5(12,15)-255/15(13,11) Aluminum rod continuous casting and rolling production line | 1 | |
1 | New rocker type 4-wheel casting machine with horizontal casting | Crystallization wheel: φ 1600 mm CuZrCr chromium zirconium copper material | 1 |
| Casting sectional area: 2340 ㎜² | |||
| Casting machine motor: 5.5KW 1450r/min AC | |||
| Cooling water circuit: 12 paths | |||
| Steel belt drying device | |||
| Italian swallow tail sliding ingot lifting device, front approach bridge, oil coating device | |||
| Steel belt tensioning, pressing and wiping device | |||
| Upper and lower chutes and horizontal casting system | |||
| 2 | Front traction and rolling shear | Front traction motor: 5.5kw 1 set Rolling shear motor: 15kw 1 set | 1 |
| 3 | Ingot passing device | / | 1 |
4 | 15 stand rolling mill | Including: gear box, box base, 15 pass rack and rack base plate, main motor 315KW 600r / min DC motor and encoder, main motor coupling, lotion tube, etc. Mill housing (optional) | 1 |
5 | Rolling mill gear oil lubrication system | Gear oil pump 5.5kw 960rpm 2 sets (1 for standby and 1 for use) | 1 |
| Two filters GLQ-80 (one for standby and one for use) | |||
| Oil tank 3m3 (1 piece) | |||
6 | Lotion lubrication system of rolling mill | Two lotion pumps 22KW (one for standby and one for use) | 1 |
| One heat exchanger (80m2) | |||
| Filter: GLQ-100 2 sets (1 for use and 1 for standby) | |||
7 | Oil free take-up channel, stairs and supports, double frame drop coiler | (1) Winding reduction motor: 4 kW 1450r / min AC (2) Basket motor: 2.2kw 1430r / min (AC) (3) Trolley moving motor: 2.2kw 48r / min (AC) | 1 |
8 | Electric control system | Including DC speed regulating device, AC frequency converter, man-machine interface and PLC, control cabinet and operation console. The main electrical components are Siemens brand, and the low-voltage electrical components < 50A are Chint and Schneider. | 1 |
Machine Photos
Related Products
Packing & Shipment
(1) CBM of machines less than a full container, it will be packed by wooden case and shipped in LCL (Less than Container Load).
(2) CBM of machines up to a full container, it will be nude packing, and fixed well by steel wires in the container, no hitting, no damage. Shipped in the way all the time, no customers complain. There will be more protection measures to ensure its transit.
Company Profile
Dongguan Wiremac Machinery Equipment Co., Ltd. Is located in Houjie Town, a famous historic town in China. Our company is a wire and cable equipment manufacturer integrating R&D, processing, assembly, commissioning and after-sales.
The company is committed to copper wire, copper clad steel, copper clad aluminum and other metal wire deep processing and research, with a variety of high quality machines: micro wire drawing machine, fine wire drawing machine, fine wire drawing machine with continuous annealing, medium fine wire drawing machine, intermediate wire drawing machine, intermediate RBD wire drawing machine and copper rod breakdown machine.
Our company provides a complete set of wire processing solutions for customers, but also customize and design non-standard special equipment according to the requirements of customers.
Our company upholds the spirit of “Honesty-based, Quality-based” enterprise, and continue to research and develop innovation and development, with professional skills and standardized pragmatic management, in line with the “High-quality and High-efficiency” business philosophy, from the overall planning, staff training, installation and commissioning, after-sales service, to provide customers with better and more satisfactory products and service.
Consulting Service
Usually, the information is required to provide you with a quote as below:
(1) Input wire size
(2) Output wire size
(3) Your bobbin/spool size
(4) Annealing required?
(5) 3 Phase voltage & frequency in your workshop
Note: It is very important, thank you!
Spare Part Service
All comes with the machine, no more worries. There will have a packing list for you.
Inspection
All machines are well inspected before shipment. The test run is
carried out to check if it is qualified.
Videos and photos with each detail will be sent to you for
confirmation.
Maintenance
All equipment will have a user manual, it will guide you how to do the maintenance. Besides, some instructions is sticked on the machine.
On-site Installation & Training Service
Our engineer will be dispatched to your workplace to help you with installation. It requires your workers to cooperate with him to install it well.
Once installed, your workers or operators will be trained by our engineer how to use the machine, how to do the maintenance, and how to produce good quality products.
Most important of all, guide your workers how to do the trouble shooting.
After-sales Service
All the machines are warranted for one year.
All parts will be sent to you free of charge if it is quality problem. However, it will be charged if it is caused by misoperation.
All parts with delivery cost will be charged after one year.
Our foreign sales will be online 24 hours to help you with any issues.
Our engineer working time is from 8:00am to 8:00pm China time.
Our Advantages
1. All the electrical elements, circuit breaker protection, bearing, belt etc are Yaskawa, Schneider, SKF, Habasit or other world famous brands.
2. The machine body is made by integrated casting, no much welding, to ensure if it will not be vibrated during machine running, and avoids corrosion.
3. Our engineers are well-trained, and have specialized in this industry for more than 10 years, very responsible and professional.
4. Our machines are well designed, with good materials, good components to make you use more easily.
5. We have zero complaints in quality from our customers home & abroad. No customers will feel it is a failed investment after buying from us. Our company is responsible for you all the time.
6. Our staff are very patient, honest, and willing to help at any time.
7. Our company has a good shareholding system, which inspires our workers to work as host.
8. The concept and idea are great in this city, with very strong industry foundation. It has a good tradition for its quality, as many Japanese companies, Taiwan companies, Hong Kong companies rooted in this city from 1980s till now.
Our Location
1. Our company is located in Dongguan, between Shenzhen and Guangzhou, near Hong Kong.
2. Half an hour to Shenzhen and Guangzhou by bullet train, one hour to Hong Kong.
3. One hour to Shenzhen and Guangzhou Airport, 2 hours to Hong Kong Airport.
4. There are many kinds of delicious & nutritious food,
historic sites and gorgeous night view.
It will make your travelling more convenient and entertained here.
Our Workshop
FAQ
1. Q: Are you manufacturer or trading company?
A: We are a manufacturer.
2. Q: What info you need before you make the proposal?
A: The input & output wire diameter, spool size, application, 3
phase voltage & frequency, annealing or not, and your other
requirement.
3. Q: How can I trust you and make a payment to you?
A: (1) We are an audited supplier by international SGS, with its
certificate. They approve that we are an original manufacturer and
meet their standard.
(2) We are a member of Made in China, who is always responsible for all customers.
(3) Please visit us and check our factory by video, and request necessary documents from us.
4. Q: I have no experience buying something abroad. What can I do?
A: We will guide and show you how to do the importation, you can also
seek help from your local agency.
5. Q: Do you provide installing and debugging overseas?
A: Overseas machine installation and worker training services are
available.
6. Q: Can you make the machine according to my design or prototype?
A: Yes, we have an experienced team for working out the most suitable
design and production plan for the machine that you are going to
book with us.
7. Q: How does your factory do regarding quality control?
A: There is zero tolerance to poor quality. Quality control complies
with SGS & ISO 9001. Every machine has to past testing and
trial running before it's packed for shipment.
8. Q: How can I trust you that machines pasted testing and trial
running before shipping?
A: 1) We record the testing videos for you, and every necessary
photos for you.
2) We welcome you to visit us and test machine by yourself in our
factory.
9. Q: What about our after-sale service?
A: We provide technical support on line as well as overseas services
by skillful technicians.
10. Q: What should I do if I just start a new business?
A: Contact us immediately, we provide free consultant pre-sales
service. Also we can help you with material purchase, worker
training, etc.
11. Q: Can I visit you factory to check machines on-site? What
Should I bring when I visit your factory?
A: We are manufacturer, and welcome customers to visit us. For
special product design, you are suggested to bring some samples,
you can test it with our machines on-site.
12. Q: Can I use my own logo?
A: No problem, please inform us.
9.5mm 12mm 15mm Aluminum Rod Continuous Casting Machine And Rolling
Inquiry Cart
0