C28x Core 32 Bit MCU Microcontroller Unit Texas Instruments TMS320F28377SPZPS

MCU Microcontroller Unit Texas Instruments/TI TMS320F28377SPZPS

Features for the TMS320F28377S

• TMS320C28x 32-bit CPU
  • 200 MHz
  • IEEE 754 single-precision Floating-Point Unit (FPU)
  • Trigonometric Math Unit (TMU)
  • Viterbi/Complex Math Unit (VCU-II)
• Programmable Control Law Accelerator (CLA)
  • 200 MHz
  • IEEE 754 single-precision floating-point instructions
  • Executes code independently of main CPU
• On-chip memory
  • 512KB (256KW) or 1MB (512KW) of flash (ECC-protected)
  • 132KB (66KW) or 164KB (82KW) of RAM (ECC-protected or parity-protected)
  • Dual-zone security supporting third-party development
  • Unique identification number
• Clock and system control
  • Two internal zero-pin 10-MHz oscillators
  • On-chip crystal oscillator
  • Windowed watchdog timer module
  • Missing clock detection circuitry
• 1.2-V core, 3.3-V I/O design
• System peripherals
  • Two External Memory Interfaces (EMIFs) with ASRAM and SDRAM support
  • 6-channel Direct Memory Access (DMA) controller
  • Up to 169 individually programmable, multiplexed General-Purpose Input/Output (GPIO) pins with input filtering
  • Expanded Peripheral Interrupt controller (ePIE)
  • Multiple Low-Power Mode (LPM) support with external wakeup
• Communications peripherals
  • USB 2.0 (MAC + PHY)
  • Support for 12-pin 3.3 V-compatible Universal Parallel Port (uPP) interface
  • Two Controller Area Network (CAN) modules (pin-bootable)
  • Three high-speed (up to 50-MHz) SPI ports (pin-bootable)
  • Two Multichannel Buffered Serial Ports (McBSPs)
  • Four Serial Communications Interfaces (SCI/UART) (pin-bootable)
  • Two I2C interfaces (pin-bootable)
• Analog subsystem
  • Up to four Analog-to-Digital Converters (ADCs)
    • 16-bit mode
      • 1.1 MSPS each (up to 4.4-MSPS system throughput)
      • Differential inputs
      • Up to 12 external channels
    • 12-bit mode
      • 3.5 MSPS each (up to 14-MSPS system throughput)
      • Single-ended inputs
      • Up to 24 external channels
    • Single Sample-and-Hold (S/H) on each ADC
    • Hardware-integrated post-processing of ADC conversions
      • Saturating offset calibration
      • Error from setpoint calculation
      • High, low, and zero-crossing compare, with interrupt capability
      • Trigger-to-sample delay capture
  • Eight windowed comparators with 12-bit Digital-to-Analog Converter (DAC) references
  • Three 12-bit buffered DAC outputs
• Enhanced control peripherals
  • 24 PWM channels with enhanced features
  • 16 High-Resolution Pulse Width Modulator (HRPWM) channels
    • High resolution on both A and B channels of 8 PWM modules
    • Dead-band support (on both standard and high resolution)
  • Six Enhanced Capture (eCAP) modules
  • Three Enhanced Quadrature Encoder Pulse (eQEP) modules
  • Eight Sigma-Delta Filter Module (SDFM) input channels, 2 parallel filters per channel
    • Standard SDFM data filtering
    • Comparator filter for fast action for out of range

Yingxinyuan INT'L(Group) LTD. was established in 2001, specializing in electronic components distribution business.The products are widely used in communication equipment, power supply, medical electronics, automotive electronics, digital electronics, industrial electronics, display modules, intelligent electronics, new energy, the Internet of things, 5G products and other fields，With high-quality products, reasonable prices, rapid distribution and timely service, we can provide customers with the most cost-effective products and save customers a lot of time.