

Add to Cart
XY Axis Manual Linear Stage , Manual Station , Manual Platform
PT-SD10-60/SD30-60R
The main material of the precision manual translation table is
aluminum alloy, which has high sensitivity and small overall size.
This series of products have good sensitivity. The table has
various sizes and moderate thickness, and can be combined in one or
more dimensions. This product can still maintain strong load
capacity, especially in the vertical direction or when used as
z-axis.
Product features
The main material is aluminum alloy with black anodizing treatment
on the surface, which is suitable for optical experiments and other
fields requiring high manual adjustment accuracy.
With a scale, it is fast and convenient to read data.
It has locking function, good locking effect and strong stability.
Rich specification series and high cost performance.
Product parameters:
Model Number | PT-SD10-60L | PT-SD10-60R | PT-SD30-60L | PT-SD30-60R | |||||
Actuator Type | Micrometer Head | ||||||||
Operating Position | Coarse adjustment:CenterFine adjustment:Right | Coarse adjustment:CenterFine adjustment:Left | Coarse adjustment:CenterFine adjustment:Right | Coarse adjustment:CenterFine adjustment:Left | |||||
Minimum Scale | Coarse adjustment:10μm/degree Fine adjustment:0.5μm/degree | ||||||||
Platform Size | 60×60mm | ||||||||
Travel Range | Coarse adjustment :±6.5mm Fine adjustment:±0.3mm | ||||||||
Travel Guide | Crossed Roller Bearing | ||||||||
Load Capacity | 5kgf(49N) | 2kgf(19.6N) | |||||||
Moving Precision | Straightness | 2μm | |||||||
Pitching | 20” | ||||||||
Yawing | 10” | ||||||||
Parallelism | 30μm | 70μm | |||||||
Driving Parallelism | 10μm | 15μm | |||||||
Weight | 0.35kg | 0.5kg | |||||||
Surface Material | Aluminum Alloy BLACK-Anodized |
Product Dimension Map
XY Axis Manual Linear Stage , Z Axis Linear Slide,Manual Station ,
Manual Platform
Installation method of manual translation table
1. Move the platform surface to the limit position to expose 2
mounting holes. Please put the supporting bolts in for temporary
fixation. Please confirm that the bolt has fully entered the bolt
mounting hole, and then proceed to the next step.
2. Next, please turn the micrometer head counterclockwise to move
the platform surface to the limit position on the other side. On
the side opposite to the position just now, two other mounting
holes will be exposed. Please put the matching bolts in and tighten
them to a certain extent. After confirming that it is consistent
with the installation position, completely fix the bolts of the
installation hole.