Large Vertical Refractory Test Furnace Flammability Testing Equipment
Brand Name:YUYANG
Certification:QB/T 2918-2007
Model Number:YY1311
Minimum Order Quantity:1 set
Delivery Time:15 days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Active Member
Location:
Dongguan Guangdong China
Address:
1207 International Commercial Building, No.81, Hongfu West Road, Nancheng District, Dongguan City, Guangdong Province, China
Supplier`s last login times:
within 27 hours
Product Details
Company Profile
Product Details
Large Vertical Refractory Test Furnace Flammability Testing
Equipment
Application:
Evaluate the fire performance of vertical construction products
Standards:
BS 476 (20)
BS EN 1363 (1 - 2)
BS EN 1364 (1)
BS EN 1365 (1)
BS EN 1366 (1 - 3)
BS EN 1634 - 1
ASTM E 119
ASTM E 814
UL10 (c)
UL 263
UL 1709
UL10 (c)
UL 1479 UL 2079
ISO 834 (1, 4, 8)
ISO 3008 ISO 3009
Description:
The fire resistance of a material provides invaluable information
for evaluating the performance of a sample and its components.
The vertical fire resistance test furnace provides a method to
quantify the ability of products and materials to withstand high
temperature exposure in a vertical orientation.
The furnace can be used to evaluate the fire resistance of products
such as walls, doors, dampers, joints and penetration seals.
This is done by calculating a number of functions, including;
Load bearing capacity, fire resistance and thermal transmittance of
the tested component.
System Features
1. Fire resistance test furnace with inner chamber
dimensions:3000mm(W) x 3000mm(H) x 1300mm(D)
2. Ability to perform tests on vertical specimens mounted on a
custom restrained frame
3. Refractory lining consists of insulated refractory bricks,
refractory castables and mineral plates.
4. Roof made of profiled bricks, anchored with cast-in-place
refractory.
5. The shell is made of mild steel plates reinforced with c-beams,
I-beams and sections to prevent structural deformation due to high
temperatures.
6. The sample restraining frame is mounted at the front end of the
furnace and is held in place by at least 4 sets of door clamps.
7. Steel shell lined with mineral fiber plates on the cold side and
refractory insulated bricks on the hot side secured to the walls
with high temperature cast in-situ blocks.
8. 4 sets of viewing ports provided by heat resistant quartz glass
at strategic locations on the long side walls.
This will allow the operator to view the complete test specimen
during the fire test.
9. Sliding doors are made of lightweight aluminum oxide enclosed in
an insulated air-cooled frame.
This will shield the furnace from heat when the viewing port is not
in use.
10. 12 sets of special glowing flame burners.
Each burner has a flame supervision unit to ensure that all
combustion units operate in fail-safe mode.
11. Furnace combustion control panels are designed for both fully
automatic and manual control modes.
Automatic ignition of the burners is by using a push button switch,
which is used to ignite the burners according to a pre-set heating
profile as described in BS 476 Parts 20-24, EN 1363 and IMO
hydrocarbon profile.
Manual burner control allows the ignition of individual burners at
will.
LP Gas Industrial Refractory Illuminated Soft Flame Burners
In the vertical furnace position, six burners are installed to the
left and right of the furnace wall.
Each burner is designed to run on LP gas and incorporates all
necessary flame safety systems, intermittent pilot systems and
temperature sensors.
Lifting and restraining frames for specimens
Two sets of frames are provided for mounting vertical specimens.
The refractory liners are made of prefabricated refractory blocks
anchored to the steel frames.
These frames are non-load-bearing frames.
A separately customized lifting frame with two side hooks is
provided to lift the specimen restraint frame into the furnace
chamber.
This allows easy placement of the vertical and horizontal restraint
frames into the furnace.
Refractory-lined connecting duct and exhaust chimney
The chimney/stack is constructed of 9 mm thick mild steel with a
refractory-lined head of 6 m. The chimney/stack is constructed of 9
mm thick mild steel with a refractory-lined head.
The chimney extends at least 3 meters above the plant roof as
required by local codes.
Combustion air blower for the furnace burner
The combustion air system was pre-piped and tested prior to
dispatch.
Temperature sensors and pressure gauges
The system was equipped with nine type K thermocouples and flat
plate thermometers, a manometer and an ambient thermocouple
assembly.
PLC System
The PLC system consists of a Siemens PLC CPU and Siemens compatible
remote I/O.
The flame-resistant data management software is custom written to
accept and save data collected during the test and is configured to
meet the heating requirements of BS 476 Parts 20 - 22, EN 1363 and
IMO hydrocarbon test curves.
Other standard time-temperature profiles can also be pre-programmed
into the system.
The PLC controller incorporates a built-in operator interface
containing the required logging and programming functions and
includes all necessary motor starters for all motors in the system.
The system provides real-time heating profiles and displays all
furnace control information on the computer screen.
Our Company
DONGGUAN YUYANG INSTRUMENT CO.,LTD is Located in Wanjiang District
(Dongguan City, Guangdong Province,China),a famous historical town
with prosperous industry and convenient transportation. We are a
high-tech enterprise which is specialized in developing and
manufacturing Fire Testing Equipment, Building Material Fire
Tester, Wire and Cable Fire Tester, Environmental Test Chamber,
Textile Testing Equipment, Toys Testing Equipment and etc.
Decades of research and development strengthen the leading edge of
YUYANG in this field, and established as an crucial role in R&D
on high quality and high-cost performance of testing equipment.
YUYANG's testing equipment are widely used in various field:
scientific institutions, colleges, inspection institutions, auto
parts, electronics, electricals, lithium battery, LED,
photoelectricity, mobile, plastic and rubber, display,
telecommunication, chemical industry, aerospace, building material
and product, wire and cable, toys, furniture, textile and fabrix,
etc.
All YUYANG testing equipment are designed according to
international test standards, such as ISO, ASTM, DIN, EN, GB, BS,
JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on. DONGGUAN
YUYANG INSTRUMENT CO.,LTD looks forward to cooperating with
customer all over the world.
If you are interested in any of our products or would like to
discuss a custom order. Please feel free to contact us. We are
looking forward to forming succesful business with new clients
around the world in the near future.
Large Vertical Refractory Test Furnace Flammability Testing Equipment
Inquiry Cart
0