Gr2 Titanium Tube ASTM B861 Bending Hydrostatic Test For Chemical Industry

Gr2 Titanium Tube ASTM B861 Bending Hydrostatic Test For Chemical Industry

Standards: ASTM B861

Products: Titanium and Titanium Alloy Seamless Pipe

Materials: Grade1~Grade38

Size: OD 0.405"(10.29mm) - 36"(914mm)

Test: Bending Test/Flattening Test/Hydrostatic Test

Product Introduction

Grade 2 titanium tube is a commonly used grade in the chemical industry. The ASTM B861 standard specification outlines the requirements for Grade 2 titanium tube and other titanium alloys, encompassing a total of 34 grades of titanium and titanium alloy seamless pipes intended for general corrosion resistance and high-temperature service. Seamless and welded pure titanium pipes, ranging from 0.405" (10.29mm) to 36" (914mm), are available in stock in pre-cut lengths and full lengths.

Titanium is a metal with high ductility and malleability, allowing us, as one of China's titanium tube factories, to produce components in various shapes, including round, oval, and even square pipes. The products produced according to the ASTM B861 specification are designed to perform well in applications where general corrosion resistance and strength at elevated temperatures are primary requirements.

Specifications

Production site: 16,000 m2

Production line: Purchase titanium tube billets--Rolling tube--remove the oil-- acid washing--annealed - straighten-- surface treatment inspection--finished titanium tube inspection.

Rolling mill: 6 sets (expect to increase to 9 sets)

Annealing furnace: 1 set for 9m tube(will rise to the online annealing system )

Acid washing pool: 1 set of standardized pickling equipment.

Straightening machine:3 sets

Flat-end chamfering equipment: 2 sets

Surface treatment equipment:1 set

Ultrasonic fault detector: 1 set

Mechanical property test equipment: 1 set

Eddy's current test equipment: 1 set

Capacity: 300 tons per month

Titanium Tube Test Measures

Bending Test

According to ASTM B861, titanium tubes with a nominal diameter of 2 in. (51 mm) and under should be able to be bent cold through 90° around a cylindrical mandrel that is twelve times the nominal diameter of the pipe without developing cracks.

Hydrostatic Test

The maximum hydrostatic test pressure must not exceed 2500 psi (17.2 MPa) for tube sizes 3 in. (76 mm) and under, or 2800 psi (19.3 MPa) for sizes above 3 in. (76 mm). The hydrostatic pressure must be maintained for no less than 5 seconds. When requested by the purchaser and stated in the order, Grade 2 titanium tubes with diameters of 14 in. (356 mm) and smaller should be tested at one and a half times the specified working pressure, provided that the fiber stress corresponding to these test pressures does not exceed half of the minimum specified yield strength of the titanium tube, as determined by the equation given in 16.1. If one and a half times the working pressure exceeds 2800 psi (19.3 MPa), the hydrostatic test pressure should be agreed upon between the manufacturer and the purchaser.

Baoji City Changsheng Titanium Co.,Ltd is registered in 2006. Registered capital of 10 million yuan, the legal person is Zhao Wenhua. Before 2006, the factory is formed as forged workshop, no been registered. The year of 2006 was exist as a starting for Changsheng Titanium Co. The factory is located in today’s No.26 Baotai Road Weibin District, Baoji City,Shaanxi Province. The factory is major in forging ,continuing the previous processing mode, but the scales has expanded nearly 30 times, and was on the right track. In 2008, it passed ISO 9001 certification.
In 2010, Baoji City Changtai Metals Trading Co.,Ltd was registered, with capital of one million yuan. The legal person was Zhao Wenli. It was located in today’s No.26 Baotai Road Weibin District, Baoji City,Shaanxi Province.