30Lux Disable Automatic Light Motion Sensor Ceiling Mounted Type

30Lux Disable Automatic Light Motion Sensor Ceiling Mounted Type

Compact Size Remote Control 220-240VAC Operating Voltage Max 100W Microwave Motion Sensor

Features:

1. 4-pole pluggable clamp terminal(L,N,N,L') for 0.5-0.75mm² cable.

2. Microwave frequency would be 5.8GHz±75MHz.

3. Optional detection range, holdtime and daylight threshold.

4. Set the parameters which you want by remote controller.

5. Compact size suitable for ceiling light and tri-proof light.

6. Loop in and loop out for easy installation.

7. IP 20 with 5 years warranty.

Product Description

Detection area Daylight sensor Hold time

ON/OFF Control Remote control Warranty 5 years

Detection Range

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-5m.

Mechanical structure

With four DIP switch poles to set all parameters.

With four poles to easily connect with LED driver and power supply.

4-pole pluggable clamp terminal(L,N,N,L')for 0.5-0.75mm² cable.

With two installation hole, easily fixed to the lighting fixture for end user.

Application Demo

1. Automatically ON/OFF function:

Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.
The daylight threshold is set to "2lux,10lux,50lux,Disable"

With sufficient daylight, With insufficient daylight, After the last detection and
even when motion detected, when motion detected, light ON. the present hold time
light remains OFF. elapsed, light OFF.

2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after hold time.
Applications: Dim places such as Basement Parking, Underpass.

When motion is detected, After people leave the detection After the last detection and
the sensor will switch on the area, light remains 100% the present hold time
light to 100% brighteness. brightness within hold time. elapsed, light OFF.

Installation Method:

User Notes:

1. Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting height and movement volume.
4. Conduct test on sunny days without the lampshade which will affect the tested lux value.

Attention:

1. Please read the instructions carefully before using this product and keep it well for all users to read at any time.

2. The seneor should be installed by qualified electrician and ensure power is off before the installation.

3. We reserve the right to modify any incorrect test,image and necessary technical parameters.

4. Any unauthorized modification is forbidden,otherwise all guarantees will be immediately invalid.

Installation precautions:

1. Microwave sensor can be installed in any lamp except the one with full metal shell.

2. The detected surface cannot be shielded by metal objects.

3. Make sure the microwave module is completely exposed outside.

4. The detection surface of the sensor module shfall be installed facing the detection area.

5. Should be kept away from driver to avoid interference genaration and lamp flashing.

6. Wiring must be strictly in accordance with the wiring diagram to avoid short circuit.

Application Environment:

1. Suitable for indoor installation to avoid false triggering due to external factors such as rain,wind or tree swing.

2. Shall not be installed in the place with all four metal shelters and small space(such as galvanized-iron roof).

3. Shall note be mounted installation,so as to avoid false trigger caused by the lamp itself shaking.

4. Shall not be installed next to large operating machines such as ventilator/ceiling fan to avoid fase triggering caused by machine vibration.

HD08SR.pdf

Shenzhen HAISEN Technology Co.,Ltd，founded in March 2013, has become a National High-Tech and ISO9001:2015 certificated Enterprise.Our new facility, an owned property is located along Songshan Lake of Dongguan city, neighbor of HUAWEI. Total footage is 8,000m², with about 300 people.

We focus on developing and manufacturing 5.8G and 10.525G microwave motion sensors, PIR Sensor and wireless control smart sensor products. We have about 40 R&D engineers, they master core hardware technology and software algorithm.

We produce the sensors all by ourselves. In our facility, you can see our SMT manufacturing room, product dept with 4 semi-automatic DIP lines, indepedent automatic testing rooms and package lines.

We have 30 people for Quality Center and we strictly follow ISO9001:2015 quality management system.
The quality center are 2 parts：
Comprehensive Testing: Verification & Assessment of product function and performance at early R&D stage

Quality Control: Quality supervision on incoming materials, manufacturing process and delivery.

Our Marketing Center is constitute by Marketing, Domestic Sales and International Sales.
To better support our customers, we have set up local offices in East China and Xiamen; and developed agents in China and all over the World.