High Voltage 347V 480V Remote Control Motion Sensor With Dimmer

Brand Name:HAISEN
Certification:UL FCC RoHS
Model Number:HD408VRH
Minimum Order Quantity:100PCS
Delivery Time:1-3 days for sample order, 1-2 weeks for bulk order
Payment Terms:L/C, T/T, Western Union
Contact Now

Add to Cart

Verified Supplier
Location: Dongguan Guangdong China
Address: 13th Floor, C1 Building, Songshan Lake Intelligent Valley, Liaobu Town, Dongguan City, 523808, Guangdong.
Supplier`s last login times: within 48 hours
Product Details Company Profile
Product Details

High Voltage 347V 480V Remote Control Motion Sensor With Dimmer


347-480V High Voltage FCC UL Motion Sensor With Dimmer Indoor Light Motion Sensor


Features:

1. 5.8GHz microwave motion sensor with dimmable function.

2. Operating voltage would be 347-480VAC,50Hz/60Hz.

3. Max installation height is 15m/49.2ft.

4. All parameters can be setting by remote control.

5. Sensitive and reliable.

6.1-10v dimming.

7. IP 20 with 5 years warranty.


Product Description:

Operating voltage347-480VAC,50Hz/60Hz
Switching capacityMax,2.3A@347Vac,50/60Hz; Max,2.5A@480Vac,50/60Hz
Stand-by power≤1w
Control methodon/off /1-10v dimming/ remote control(HD02R,HD03R,HD05R)
Microwave frequency5.8GHz±75MHz
Microwave power<0.3mW
Detection area25%/50%/75%/100%
Hold time5s/30s/1min/3min/5min/10min/20min/30min
Daylight threshold2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable
Stand-by period0s/10s/30s/1min/5min/10min/30min/+∞
Stand-by dimming level10%/20%/30%/50%
Control lineBlack L,White N,Red L',Gray 1-10v-,Purple 1-10v+
Mounting heightMax.15m ( 49.21ft )
Deteation rangeMaxØ14m/45.93ft
Motion detection0.5–1,5m/s
Packing method

①the small white box(110*100*105mm),

②paper flat,

③outer carton(465*300*465mm)with drying agent

Detection angle30°-150°
Operating temperature–20℃–+55℃
IP ratingIP 65
Warranty5 years
Safty standardEN61347-1 EN61347-2-13 EN60598-1

ON/OFF Control Detection Area Daylight Threshold Remote Control

Warranty 5 years Hold Time 8-15m Highbay Stand-by period stand-by dimming level

Detection Range

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Typical installation height 8-15m.


Mechanical structure

With remote control to set all parameters.


Application Demo

1. Automatically ON/OFF function:

Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.


With sufficient daylight, With insufficient daylight, After the last detection and
even when motion detected, when motion detected, light ON. the present hold time
light remains OFF. elapsed, light OFF.

2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after stand-by period.
Applications: Dim places such as Basement Parking, Underpass.


When motion is detected, After people leave the detection After the last detection and
the sensor will switch on the area, light remains 100% the present hold time
light to 100% brighteness. brightness within hold time. elapsed, light OFF.

3. Function Demo - Dimmable control/Corridor function:

With sufficient daylight, With insufficient After last detection, the After the stand-by
even when motion daylight, when motion light will be dimmed period,light OFF.
detected, light remains detected,light ON. down to the stand-by
OFF. dimming level
(10%,20%,30% or 50%)

User Notes:

1.Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting height and movement volume.
4. Conduct test on sunny days without the lampshade which will affect the tested lux value.


Memory & Apply Mode

1. Press "ON/OFF button" to turn on the light or off.

2. To reset the parameters, Please follow the steps as below:

Step 1 - Press ON, to turn on the light if it was off at the start.

Step 2 - Press "Start" to the well-setting sensor.

Step 3 - Press the button of Detection range, Hold time, Stand-by dimming level,

Stand-by period and Daylight threshold one after the other in sequence (Press "+/-" to

set parameters).

Step 5 – Press “Memory” to memorize the settings.

Note: The interval of each parameter setting shall be controlled within 30s.

Isolated Setting Mode

1. Press "ON/OFF button" to turn on the light or off. Press "Scene", the remote will

activate settings that were saved last or remain at the factory default settings.

2. To reset the parameters, Please follow the steps as below:

Step 1 - Press ON, to turn on the light if it was off at the start.

Step 2- Press any button of "Scene", Test" and "Apply" to begin the sensor detection

mode.

Step 3 - Press the button of Detection range, Hold time, Stand-by dimming level,

Stand-by period and Daylight threshold one after the other in sequence.

3. To programme other lights in the array that have similar sensors to the same

programme.

Step 1 - Press "ON" to the second sensor

Step 2 - Press "Apply"

Notes:

1. Settings will be saved automatically and remain until you press reset again.

2. Light will flicker when setting each parameter.

3. The icon will flash when setting the corresponding parameter.


HD408VRH .pdf


China High Voltage 347V 480V Remote Control Motion Sensor With Dimmer supplier

High Voltage 347V 480V Remote Control Motion Sensor With Dimmer

Inquiry Cart 0