Remote Control Plane Antenna Indoor Light Motion Sensor

Plane Antenna Remote Control Build-in Dial Code RoHS CE Certification

Features:

1.Constant current output.

2.On/off control by relay.

3.Tri-level control by 1-10V output.

4.Suitable for ceiling lights and Bulkhead.

5.Sensitive and reliable.

6.All parameters could be set by remote control.

7.IP 20 and 3 years warranty.

Technical data:

On/Off Control Detection Area Hold Time Daylight Sensor

Stand-by dimming Stand-by Output Current Remote Control

level Period

Dtection Area:

The fixture indicates teh maximun distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-6M.

Mechanical structure:

Dimensions:

Wiring diagram:

Daylight periority:

Dusk/Dawn sensor:

Our special active photocell technology can tell the difference between natural light and LED light, to

ensure the light will be off when needed.

With Daylight priority function, HT30V is able to differentiate artificial light brightness from

Application:

1.Automatically ON/OFF function:

Light on when detect movement and off after people leave at night.Applications:Corridor,Staircase.The daylight threshold is set to"2Lux,10Lux,50Lux".

With sufficient daylight,even With insufficient daylight, After the last detection and the

when motion detected,light when motion detected, present hold time elapsed,

remains OFF. light ON. light OFF.

2.No daylight function:

The daylight threshold is set to"Disable".Light on when detect movement,after people leave,light off after stand-by period,Applications:Dim places such as basement parking ,underpass.

When motion is detected, After people leave the After the last detection and

the sensor will switch on the detection area,light remains the present hold time

light to 100% brightness. 100% brightness within elapsed,light OFF.

hold time.

3.Function demo-dimable control/corridor function

With sufficient daylight,even With insufficient daylight, After the last detection the light

when motion detected,light when motion detected, will be dimmed down to the

remains OFF. light ON. stand-by dimming level

(10% or 30%)after hold time

After the stand-by period,

light OFF.

Installation Method:

Application:

User Notes:

1.Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2.The driver voltage shall be stable and float within 10%.
3.Detection area will be affected by speed of motion, mounting height and movement volume.
4.Conduct test on sunny days without the lampshade which will affect the tested lux value.

Remote Control Application:

1.Press "ON/OFF button "to turn on the light or off.

2.To reset the parameters,Please follow the steps as below:

Step 1-press ON,to turn on the light if it was off at the start.

Step 2-press "Start" to the well-setting sensor

Step 3-press the button of detection rang,hold time,stand-by dimming level,stand-by period and daylight threshold one after the other in sequence(press"+/-"to set parameters).

Step 4-press "Memory" to memorize the settings.

(Note:The interval of each parameter setting shall be controlled within 30s)

3.To programme other lights in the array that have similar sensors to the same programme.

Step 1-press"ON" to the second sensor

Step 2-press"Apply".

Remark:Factory default setting:detection area 100%/hold time 5s/daylight threshold disable/satnd-by period 0s/stand-by dimming level 10%.

Shenzhen HAISEN Technology Co.,Ltd，founded in March 2013, has become a National High-Tech and ISO9001:2015 certificated Enterprise.Our new facility, an owned property is located along Songshan Lake of Dongguan city, neighbor of HUAWEI. Total footage is 8,000m², with about 300 people.

We focus on developing and manufacturing 5.8G and 10.525G microwave motion sensors, PIR Sensor and wireless control smart sensor products. We have about 40 R&D engineers, they master core hardware technology and software algorithm.

We produce the sensors all by ourselves. In our facility, you can see our SMT manufacturing room, product dept with 4 semi-automatic DIP lines, indepedent automatic testing rooms and package lines.

We have 30 people for Quality Center and we strictly follow ISO9001:2015 quality management system.
The quality center are 2 parts：
Comprehensive Testing: Verification & Assessment of product function and performance at early R&D stage

Quality Control: Quality supervision on incoming materials, manufacturing process and delivery.

Our Marketing Center is constitute by Marketing, Domestic Sales and International Sales.
To better support our customers, we have set up local offices in East China and Xiamen; and developed agents in China and all over the World.