12 spindles Nylon Brush Cutter Trimmer Line 1.5mm diamater

1. Extruder

(1) Screw diameter: 80mm;

(2) L:D: 30:1; material of screw: 38CrMoALA ；

(3) Pressure automatic feedback system can adjust the screw speed automatically.

(4) Screw heater: Cast aluminums heating rings.

(5) Metering pump: 1 set, rotation speed 0-45rpm.

(6) Electrical heating spinneret device

2. Cooling water tank: 2 sets

(1) The tank is made by stainless steel 304.

(2) The height of tank is horizontal pushing structure.

3. The first seven roller stretching unit

(1) Seven variable diameter rollers, material: steel pipe with hard chrome plating.

(2) Reducer is from Jiangsu Guomao Reducer Co., Ltd.

4. Hot water tank: 1 set

(1) Tank size: 4000mm

(2) Heating power: 45KW in 2 zones,

5. The second seven roller stretching unit

(1) Seven variable diameter rollers, material: steel pipe with hard chrome plating.

(2) Reducer is from Jiangsu Guomao Reducer Co., Ltd.

6. Hot blast oven for stretching.

(1) Oven length: 4000mm

(2) Heating power: 22.5kw, electric heating.

7. Seven roller stretching unit C, with brake resistor

(1) Seven variable diameter rollers made by steel pipe with hard chrome plating.

(2) Built-in oil lubrication system which makes the gears runs steady.

8. Single layers hot blast annealing oven: 1 set

(1) Fan power: 2.2KW×2 sets.

(2) Heating power: 22.5KW

9. The Fourth seven roller stretching unit

(1) Seven variable diameter rollers, material: steel pipe with hard chrome plating.

(2) Reducer is from Jiangsu Guomao Reducer Co., Ltd.

9. Spindle winder: 10 spindles

(1) Spool as sample.

(2) Winding motor: 15KG

10. Electrical control system: 1 set

Specification:

Pictures: