0.08mm PA Monofilament Extruder Machine Makeup Brush making

(1) Screw diameter: 50mm; Rotation speed: 0～72rpm.

(2) L:D: 30:1; material of screw: 38CrMoALA ；

The screw structure is special designed for PA6 chips..

(3) Pressure automatic feedback system can adjust the screw speed automatically to make sure the uniform of yarn.

(4) Screw heater: Far infarad.

(5) Spinneret device: 1 set

(6) Heater: Electric heating ring to ensure the temperature stabilization.

(7) Metering pump, rotation speed 0-45rpm.

(8) Two hopper doser: 1 set

2. Queching tank: 1 set

(1) The tank is made by stainless steel 304.

(2) The height of tank is horizontal pushing structure is conveniently to disassembly the spinneret.

4. The first seven roller stretching unit

(1) Seven variable diameter rollers, material: steel pipe with hard chrome plating.

(2) Steel cabinet with accurately grind gear makes the roller run smoothly.

No rubber roller.

(4) Reducer is from Zhejiang Tongli Reducer Co., Ltd.

(5) Built-out oil lubrication system which makes the gears run steady.

5. Hot blast stretching oven.

(1) Oven length: 4000mm

(2) Heating power: 22.5kw, electric heating.

6. The second seven roller stretching unit

(1) Seven variable diameter rollers, material: steel pipe with hard chrome plating.

(2) Steel cabinet with accurately grind gear makes the roller run smoothly.

No rubber roller.

(3) Reducer is from Zhejiang Tongli Reducer Co., Ltd.

7. Single layers hot blast annealing oven

(1) Fan power: 2.2KW×2 sets.

(2) Heating power: 22.5KW

(3) Special design of hot air channel which make the temperature evenly.

8. The third seven roller stretching unit

(1) Seven variable diameter rollers, material: steel pipe with hard chrome plating.

(2) Steel cabinet with accurately grind gear makes the roller run smoothly. No rubber roller.

(3) Reducer is from Zhejiang Tongli Reducer Co., Ltd.

9. Lubricating system: 1 set

(1) Frequency control of speed

10. Semi-auto winding collector

(1) Winding frame length is as per customer’s request.

(2) Winding motor: 0.37KW

12. Electrical control system: 1 set

13. Overall size: 49000×2600×2100mm

14. Installation power: 185kw

Parameter: