

Add to Cart
Handheld Protection Relay Test Set with IEC 61850 Testing
Model: RELAYSTAR-Z70
The Handheld Protection Relay Test Set RELAYSTAR-Z70 is designed
for both conventional substation and digital substation
commissioning testing and maintenance. It can output 3-phase
current(3x0…10A) and 3-phase voltage(3x0…120V) for testing
conventional protection relays. Its system of optical digital part
is developed based on IEC61850 protocol, which supports SV/GOOSE
message receiving, sending and analysis.
The RELAYSTAR-Z70 is very convenient and portable network test set
that with a 10.1-inch touch screen so that engineer can take it
only to different places in the substation for IEDs, no need to
take complicated test sets and laptop, and other testing
accessories.
The RELAYSTAR-Z70 is has abundant testing modules for protection
relay testing, MU testing, SV/GOOSE sending, receiving and
analysis, SCD file import and analysis etc.
The RELAYSTAR-Z70 also can be used for testing other IEDs in
digital substation as a multiple-functional tool, including sending
and receiving GOOSE, SV, add traffic flow to the switch or other
IEDs, check the MU time delay, measure the fiber power of fiber
ports etc.
Main Features
1) 10.1-inch high resolution touch screen for operation
2) Based on SOC hardware platform and embedded Linux system
development
3) 3-phase current(3x0…10A) + 3-phase voltage(3x0…120V) outputs for
testing conventional protection relays
4) Comply with IEC61850-9-1/9-2/9-2LE, FT3/FT3LE, GOOSE and other
optical digital message standards
5) Configure 36 optical digital SV/GOOSE channels
6) Support 100M optical network interface modules
7) Support FT3 optical serial port modules
8) Support IRIG-B time synchronization
9) Real-time monitoring of optical power and network optical
digital packets
10) Support standard SCL file import, extracts required device
instance configuration information, and generates topology by
one-click parsing
Technical Data
General Current and Voltage Outputs
Current Generator | Setting range | 3-phase AC(L-N): 3x0…10A |
DC(L-N): 3x0…±2 A | ||
Power | max. 30VA | |
Accuracy | AC: ≤0.1% | |
DC: ≤0.2% | ||
Resolution | 1mA | |
Voltage Generator | Setting range | 3-phase AC(L-N): 3x0…120V |
DC(L-N): 3x0…±170V | ||
Power | max. 30VA | |
Accuracy | AC: ≤0.1% | |
DC: ≤0.2% | ||
Resolution | 1mV | |
General Generators | Frequency | range: 10~1200Hz |
accuracy: 0.001Hz | ||
resolution: 0.001Hz | ||
Phase | range: 0° ~+360° | |
accuracy: 0.01° | ||
resolution: 0.01° | ||
Harmonic | superposition order: 1~24 times | |
distortion: ≤0.5% |
Ethernet Communication Interfaces
Mode | 10/100Base-TX(10/100Mbit,twisted-pair,auto-crossover) |
Number of port | 1 |
Type of interface | RJ45 |
Status indication | LED lights |
Optical Fiber Communication Interfaces
Mode | 100Base-FX (100Mbit, optical fiber, full duplex) |
Number of port | 2 |
Type of interface | LC |
Fiber type | 62.5/125μm(multi-mode fiber) |
Wavelength | 1310nm |
Transmission distance | >1km |
Status indication | LED lights |
FT3 Interfaces
Number of port | 2 (1 for transmitting, 1 for receiving) |
Type of interface | ST |
Fiber type | 62.5/125μm (multi-mode fiber) |
Wavelength | 850nm |
Binary Inputs
Number | 2 |
Type | potential-free contact or idle contact (automatic identification) |
Threshold characteristics | “0”: 0~6V; “1”:12V~250V |
Binary Outputs
Number | 2 |
Type | idle contact |
Break capacity | 250VAC/0.5A; 250VDC/0.2A |
Power Supply
Input for adaptor | AC 100V~240V, 50/60 Hz |
Output of adaptor | DC 15V/3A |
Built-in lithium battery | 7.4V, 9600mAh |
Continuous working time | more than 8 hours |
Miscellaneous
Weight | 2.7kg( lb) |
Dimensions (W x H x D, without handle) | 270×210×64mm(x11.61x9.84 in) |
The Handheld Protection Relay Test Set RELAYSTAR-Z70 is
multifunctional test set for conventional protection relays, IEC
61850-based protection devices and IEDs.