

Add to Cart
SINO Digital Linear Scale 3 Axis Screen Readout DRO Display Sensor Mill Lathe EDM Grinding
SINO 3 Axis Sensor-Powered Digital Linear Scales Readout DRO
Display
The graphics function is made easier to utilize by these
characteristics. It is the world's most sophisticated factory, with
an input frequency of up to 5 MHZ with A/B, and the first in China
to employ a 16- and 32-bit calculator in a DRO system.
Features:
Three Axis Capability: You may monitor and measure the position of
several machine axes at once with the SINO DRO system's support for
up to three axes.The system makes use of digital linear scales,
which are precise measuring tools that translate linear
displacement into electrical signals.
Screen Readout DRO Display: The DRO display device presents the
measured position measurements in a digital format on a clear,
readable screen.
Compatibility: A variety of machine tools, such as milling
machines, lathes, EDM, and grinding machines, may be used with the
system.
Sensor Technology: The system's sensors are made to reliably
deliver position feedback and detect linear displacements with
accuracy.
Usage:
Installing the digital linear scales involves mounting them on the machine axes you wish to measure. Usually, screws or mounting brackets are used to secure the scales parallel to the axis of motion.
Connection: Connect the scales to the DRO display unit using the
provided cables and connectors. Ensure proper connection and secure
the cables to avoid interference or damage.
Calibration: Perform the calibration procedure to align the scales
with the machine axes and set a reference point. Calibration
ensures accurate readings throughout the measuring range.
Configuration: Configure the DRO display unit based on your machine
and application requirements. This may involve setting measurement
units (metric or imperial), resolution, and other parameters.
Operation: Start the machine and observe the position readings on
the DRO display unit as you move the machine axes. The real-time
readings allow you to track and control the machine positioning
accurately.
SDS2-3VA DRO System Features:
All Chinese optical linear glass scales are supported by the LCD
display, which is frequently seen in lathe, drilling, boring, and
milling equipment.
It is more helpful for users of milling machines and lathes from
various countries since it can switch between Chinese and English
on a single display.
Linear Form Error Correction
Power Interrupts Memory
Sleep switch
Mathematical calculation
RS-232-C interface (optional)
Specifications of SINO SDS2-3VA digital readout system + linear
scale encoder
The SDS2-3VA is a high-performance universal display console that has the ability to mill, lathe, and grind.
Up to three linear encoders can be connected to this three-axis kind. Additional connectors are available to combine axes or change the input to suit equipment manufactured by other manufacturers. Please see the encoder compatibility guide below.
strong die cast casing with a front panel membrane that is both haptic and long-lasting.
large, easily readable LCD screen.
PCD, line of holes, 200 zero memory, radius/diameter display, and tool offsets are among the features.
1 PC | 3 Axis LED digital readout SDS2-3Va |
1 PC | Protection cover |
1 PC | Instruction Manual (English) |
1 PC | Cable |
Product image /photos:
The rack in the picture is optioned, not standard product.