

Add to Cart
Speed Regulation Movable Cement Grouting Machine Manual Flow Stability
Cement Grouting Machine Manual
Features of Cement Grouting Machine Manual:
1. Maintenance downtime:
When the grouting pump is not used for a short or long term, the
pump head should be disassembled, cleaned and brushed with antirust
liquid or grease before reassembly for later use.
2. Disassembly and installation method:
Remove the four fastening bolts connected with the pump head and
the cylinder, and remove the material cylinder and the inlet and
outlet of the slurry.
Remove the connecting bolts between the inlet and outlet of the
slurry and the pump head respectively, and take out the steel ball,
sealing gasket and the "O" rubber ring for end face sealing.
Clean up the removed parts in time, and install them in reverse
according to the above method after rust-proof treatment. Please
pay attention not to damage the seals when disassembling.
Parameters of Cement Grouting Machine Manual:
Model | SYB | |
Cylinder diameter | 80mm | |
Motor power | 11kw | |
Grouting capacity | 27-100 L/MIN | |
Outlet pressure | 5-8Mpa | |
Outlet diameter | 19mm | |
Inlet diameter | 25mm | |
Cylinder number | 2 | |
Particle diameter size | ≤5mm | |
Suction Height | 2.5m | |
Weight | 490kg |
Working Performance of Cement Grouting Machine Manual:
This series of manual grouting machines are professional grouting
equipment, which can realize both single-liquid grouting and
double-liquid grouting. Because of the full hydraulic pressure,
small size and light weight, it can be used in a wide range of
construction. Good adjustability: the pump's pressure displacement
can be arbitrarily adjusted within the design range. When the
pressure exceeds the allowable pressure, the relief valve will
automatically open and the cylinder and working cylinder will stop
working, thus playing a safe role. The motor and air cooler of this
series of grouting pump can be used in flammable and explosive
construction sites such as coal mines after being replaced with
explosion-proof components. A shock-resistant pressure gauge is
installed in the hydraulic system, which can accurately reflect the
working state of the pump. This series of hydraulic grouting pumps
can also be used as water pumps, sewage pumps and mud pumps.
Pictures of Cement Grouting Machine Manual: