High Ra 95 SMD LED 2835 Zero Blue Ray Full Spectrum Teaching Room Light

High Ra 95 2835 zero blue ray full spectrum teaching room light

Application Introduction:

The blue light is produced because the white light or warm color light emitted by the LED is excited by the different color temperatures of white light or warm white caused by the phosphor sprayed on the surface of the blue chip. Ordinary phosphor can only filter out part of the blue light in the spectrum. Although what we see with our naked eyes is white, the spectrum still contains a large number of blue light components. No blue light technology is to filter out the short wave blue light between 400-480nm (nm) in the light by means of encapsulated spectrum technology, reduce the damage of blue light to the retina, meet the national standard RGO, and protect the visual health of infants and young children.

Quick details:

Product specification:

Package Structure:

Figure: 0.2W medium power thin series circuit diagram

Tolerance: ±0.2mm unless otherwise noted

Electrodes: Ag Plating Copper Alloy

Encapsulating Resin: Silicon Resin

Package: Heat-Resistant Polymer

Absolute Maximum Ratings:

Typical Electro-Optical characteristics curves:

LED Reliability Test List:

Packaging:

Cautions:

The encapsulated material of the LEDs is silicone. Therefore the LEDs have a soft surface on the

Top of package. The pressure to the top surface will be influence to the reliability of the LEDs. Precautions Should be taken to avoid the strong pressure on the encapsulated part. So when use the picking up nozzle,The pressure on the silicone resin should be proper.

Soldering iron:

When hand soldering, the temperature of the iron must less than 300℃ for 3 seconds.

The hand solder should be done only one times

SMT Reflow Soldering Instructions SMT:

Reflow soldering should not be done more than two times ；

When soldering , do not put stress on the LEDs during heating ;

The recommended reflow soldering profile as following ;

Product features:

Adopt good quality chip and frame ,antistatic good stability Ultra low attenuation

High brightness ,low attenuation high color rendering

Minimum 70,80,90 95 CRI options

Strong welding and good stability undead light

Product series and company logo on the front

CE ROHS LM80 Certification

Production Process:

Phoenix (suzhou) Electronic Co., Ltd is a modern enterprise specializing in LED packaging production. Products are widely used in UV curing, sterilization, office lighting, commercial lighting, advertising lighting and other fields. The company was founded in 2008. After nearly ten years of precipitation and accumulation, our company is full of talents and vitality. There are more than 5000 square meters of workshops and supporting facilities, more than 60 new production lines, a large number of professional engineering and technical personnel, rich production experience and advanced production technology. They often analyze and customize products for customers, which can not only meet the special-shaped needs of customers, but also meet the needs of large-scale orders.