32Gbaud PAM4 CDR Support For NRZ And PAM4 Signals Clock Recovery Module

32Gbaud PAM4 CDR Support For NRZ And PAM4 Signals Clock Recovery Module

Product overview

A clock recovery device can receive an input data (or clock) signal, lock it using a phase-locked loop (PLL) circuit, and output a recovery clock. The recovered clock can be used as the time reference of the oscilloscope or BERT. When the sampling oscilloscope tests the optical eye pattern and waveform, the crossover clock with the same origin as the measured signal is needed to trigger. CDR (Clock recovery) module is mainly used for sampling oscilloscope test optical eye map, but does not provide a trigger clock test environment, the typical application is the test of optical network equipment, because the measured device itself does not have a frequency division clock output, in the test of optical eye map need to recover the clock signal for triggering the sampling oscilloscope.
U9720B CDR with an FC optical interface adapter, suitable for conventional SFP28/56, SR, LR and BIDI and other modules of optical signal access, support NRZ and PAM4 signals, FC optical interface to receive optical signals into electrical signals, CDR then extract the signal clock and output. The clock signal is mainly used as the trigger signal of the oscilloscope.

Main parameters of CDR:
1) Clock recovery range: 25~ 32 Gbps(GBaud);
2) Support both NRZ and PAM4 signals;
3) Wavelength range: support single mode 1250~1650 nm;
4) Optical input range: +5 ~ -15dBm;
5) Clock output frequency division ratio: 2/8/32/40;
6) Output electrical clock amplitude: AC Couple/ 200~800mVpp;
7) Spectral ratio (can be selected according to the user) : 10% (CDR) -90% (Output);
8) Support clock recovery of single-mode optical signals;
9) Optical interface type: FC/PC optical interface;
10) Electrical interface type: 40GHz 2.92mm Female;

Specification

"To do import substitution, to create national brand" is the journey that Uc Instruments is brave to climb and the goal of continuous progress.

Guangzhou UC Instruments., Co. Ltd. was founded in March 2009 and has been recognized as a high-tech enterprise in Guangdong Province.

Guangzhou UC Instruments., Co. Ltd. is willing to join hands with chip manufacturers, device manufacturers, equipment manufacturers, communication operators and data centers in the optical communication industry, as well as teaching and research units in the industry, to create a brilliant industry. To provide industry users with "UC" independent brand measurement instrument products and services, and automated test system customization services.

We warmly invite customers to choose our products and services. We will try our best to do a good job in the spirit of craftsmanship in our products, with enthusiasm to do a good job in our services, and strive to become the majority of users in the field of product measurement and testing strong backing.

The full range of Youxi instrument products are:

8 series passive measuring equipment: light source series, optical power meter series, optical attenuator series, plug back loss meter series and optical polarization generator and optical switch series, etc.

9 series of active measuring equipment: BER series, optical oscilloscope series, clock recovery instrument series, LIV measuring system and 10G/100G/400G optical module test and evaluation board series.