OLED Display Factory China 0.96 Inch 128x64 Dots OLED Graphic Module Single Color SPI Interface

Brand Name:SAEF
Certification:ISO9001 / ISO14000
Model Number:SF-OS096HX-12864W-01
Minimum Order Quantity:3 pcs
Delivery Time:3-5 weeks
Payment Terms:L/C, T/T, Western Union, Paypal
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen China
Address: 3 FL., Building 25, Yuan Yi Yuan Industrial Park, QianJin Rd, XiXiang, Bao'An, ShenZhen, China
Supplier`s last login times: within 41 hours
Product Details Company Profile
Product Details

0.96 inch OLED Display SPI interface Product Introduction


Product Quick Review

  • Model Number SF-OS096HX-12864W-01
  • 0.96 inch
  • Dot resolution 128x64
  • Interface: 6800, 8080, SPI, I2C
  • Driver IC: SSD1306BZ
  • Pin Number: 30
  • Touchscreen: No

Description


SF-OS096HX-12864W-01 is a 128x64 resolution COG graphic OLED display module, diagonal size 0.96 inch. The model is designed as consumer grade which is having the advantage of competitive price. The module is built-in with SSD1306 IC; it supports 6800, 8080, I2C and 4-wire SPI serial interface. The supply voltage for logic is 3V, supply voltage for display is 7.5V, display with 50% check board current is 6mA @ 7.5Vcc (typical value), driving duty 1/64.


SF-OS096HX-12864W-01 this 0.96 inch COG Graphic OLED module is suitable for wearable device, smart home applications and etc. This module can be operating at temperatures from -40℃ to +70℃; its storage temperatures range from -40℃ to +85℃.


Product advantages


SAEF Technology is a professional OLED Module Supplier. We provide a wide range of standard passive matrix OLED (PMOLED) / OLED dot matrix display and custom design Character OLED modules, Graphic OLED displays and OLED display panels. Mechanical structure includes Chip on Board (COB), Chip on Glass (COG), and TAB (Tape Automated Bonded) types. Customers can upgrade applications from STN LCD to OLED displays easily. SAEF OLED modules are featured with all the important advantages:

  • Faster response time “At +25 ℃ 10 μsec.”
  • Unlimited viewing angle “Up to 175 degree”
  • Thin – No need of backlight, self emitting
  • High Brightness
  • High contrast ratio “Up to 10,000:1”
  • Wide Operation Temperature “-40 ℃ ~ 80 ℃”
  • Lower power consumption

0.96 inch Thin OLED Display Product Drawing





Interface Pin Definition


PIN NO.SYMBOLTYPEFUNCTION DESCRIPTIONS
1NC(GND)PIt should be connected to external ground.
2C2P

I

C1P/C1N-Pin for charge pump capacitor.

C2P/C2N-Pin for charge pump capacitor.

Connect to each other with a capacitor. They must be floated when the Charge pump not use.

3C2N

as above

4C1Pas above
5C1Nas above

6


VBAT


P

Power supply for charge pump regulator circuit.

It must be connected to external source when charge pump is used. It must be float when charge pump is not used.

7NCNC
8VSSPGround pin. It must be connected to external ground.
9VDDPPower pin for logic circuit. It must be connected to external source.
10BS0Interface Select Pins
11BS1Interface Select Pins
12BSInterface Select Pins
13CS#IChip Select input pin. Active “L”
14RES#IHardware reset input pin. Active “L” .

15


D/C#


I

This is Data/Command control pin.

When the pin is pulled HIGH, the data at D[7:0] is data.

When the pin is pulled LOW, the data at D[7:0] is command. In I2C mode, this pin acts as SA0 for slave address section.

When 3-wire serial interface is selected, this pin must be connected to VSS


16


R/W#


I

read/write select pin.

is selected, this pin must be connected to


17


E#


I

read/write enable pin.

is selected, this pin must be connected to

18D0

I/O


These are 8-bit bi-directional data bus to be connected to microprocessor’s Data bus.

When serial interface mode is selected, D2 should be kept NC, D1 will be the serial data input: SDIN, D0 will be the serial clock input: SCLK.

When I2C mode is selected, D2, D1 should be tied together and serve as SDA and D0 is the serial clock input, SCL.

19~25D1~D7

These are 8-bit bi-directional data bus to be connected to microprocessor’s Data bus.

When serial interface mode is selected, D2 should be kept NC, D1 will be the serial data input: SDIN, D0 will be the serial clock input: SCLK.

When I2C mode is selected, D2, D1 should be tied together and serve as SDA and D0 is the serial clock input, SCL.


26


IREF


I

Current reference for brightness adjustment.

This is segment output current reference pin. A resistor should be connected between this pin and VSS .Set the current at 12.5 uA maximum.

27VCOMHO

COM signal deselected voltage level.

A capacitor should be connected between this pin and VSS.


28


VCC


P

Power supply for OLED driving voltage. A capacitor should be connected between this pin and VSS, when charge pump is used.

It must be connected to external source when charge pump is not used.

29VLSSPThis is an analog ground pin. It should be connected to VSS externally.
30NC(GND)PIt should be connected to external ground.

Absolute Maximum Ratings


CharacteristicSymbolStandard ValueUnitNotes
MINTYPMAX
Power Supply Voltage(1)VDD-0.3-+4.0V1,2
Power Supply Voltage(2)VBAT-0.3-4.5V1,2
Power Supply Voltage(3)VCC0-15.0V1,2
Operating TemperatureTOPR-40-+700C
Storage TemperatureTSTG-40-+850C3
LifeTime (120 cd/m2)10000--hour4
LifeTime (80 cd/m2)30000--hour4
LifeTime (60 cd/m2)50000--hour4

Note 1: All the above voltages are on the basis of “VSS = 0V” .

Note 2: When this module is used beyond the above absolute maximum ratings, permanent breakage of the module may occur. Also, for normal operations, it is desirable to use this module under the conditions according to Section 9-1 “DC ELECTRICAL CHARACTERISTICS” . If this module is used beyond these conditions, malfunctioning of the module can occur and the reliability of the module may deteriorate.

Note 3: The defined temperature ranges do not include the polarizer. The maximum withstood temperature of the polarizer should be 80.C.

Note 4: VCC = 9.0V, Ta = 25°C, 50% Checkerboard.

End of lifetime is specified as 50% of initial brightness reached. The average operating lifetime at room temperature is estimated by the accelerated operation at high temperature conditions.


DC Electrical Characteristics


SymbolParameterTest conditionStandard ValueUnit
MINTYPMAX
VDDLogic Supply Voltage-1.652.83.3V
VBATCharge Pump Regulator Supply VoltageInternal Charge Pump Enable3.5

-

4.2V
VCCOperating Voltage for OLED (Generated by charge pump)Internal Charge Pump Enable7.07.5V
VCCOperating Voltage for OLED (Supplied Externally)Internal Charge Pump Disable8.59.09.5V
VIHHigh Logic Input Level0.8*VDD--V
VILLow Logic Input Level--0.2*VDDV
VOHHigh Logic Output LevelIOUT = 100µA, 3.3MHz0.9*VDD--V
VOLLow Logic Output LevelIOUT = 100µA, 3.3MHz--0.1*VDDV
IDD, SLEEPIDD, Sleep Mode Current--10uA
IBAT, SLEEPIBAT, Sleep Mode Current--10uA
ICC, SLEEPICC, Sleep Mode Current--10uA
IDDVDD Supply Current-50150uA
ICC

VCC Supply Current

(VCC Supplied Externally)

VDD = 2.8V, VCC = 9V,

100% Display Area Turn on


-

9.015.0mA

IBAT

IBAT Supply Current

(VCC Generated by charge pump)

VDD = 2.8V, VCC = 7.25V,

100% Display Area Turn on


-


25.6


32.0


mA


Optical Characteristics


SymbolParameterconditionStandard ValueUnit
MINTYPMAX
Lbr

Brightness

(VCC Supplied Externally)

120

-


-

cd/m2

Lbr

Brightness

(VCC Generated by charge pump)


80


120


-


cd/m2

(x)C.I.E. (White)C.I.E. 19310.250.290.33
(y)0.270.310.35
CRDark Room Contrast-2000:1-
Viewing Angle-160-degree

0.96 inch Thin OLED Display Product Image


Factory Facilities and Certificates



China OLED Display Factory China 0.96 Inch 128x64 Dots OLED Graphic Module Single Color SPI Interface supplier

OLED Display Factory China 0.96 Inch 128x64 Dots OLED Graphic Module Single Color SPI Interface

Inquiry Cart 0