Add to Cart
TFT LCD 4 Inch 320x320 Square Type MCU&SPI Interface 3.3V
Product Introduction
SAEF TECHNOLOGY SF-TO400DX-8979A-CT TFT LCD display module is a transmissive type color active matrix
TFT(Thin Film Transistor) liquid crystal display (LCD) that uses
amorphous silicon TFT as a switching device. This module is
composed of a TFT LCD module, a driver circuit, and a back-light
unit. the resolution of a 4” contains 320 (RGB)X 320 dots, and it
can display up to 262k color. SF-TO400DX-8979A-CT TFT LCD model supports MCU and SPI interface; the supply voltage
(VCC) of driving LCD panel is from is 2.7V to 3.6V. Typical value
is 3.3V.
SF-TO400DX-8979A-CT can be operating at temperatures from -20℃ to +70℃; its storage
temperatures range from -30℃ to +80℃. the LCD module is with PCAP
capacitive touch screen, It is great for automation, GPS, medical
equipment, industrial device, security equipment white goods, smart
home applications, IoT System, car equipment, car dashboard, car
audio, car clock, car door display system, water ionizer, which
requires TFT display in high quality and colorful image.
Product: | TFT 4″ Inch |
---|---|
Resolution: | 320X320 Pixels |
Interface: | MCU SPI |
Touch Screen: | With PCAP Capacitive Touch Screen |
Outline Dimension: | 84.0(W) x 84.0 (H) x 3.37 (T) mm (with touch) |
Viewing Direction: | All Viewing Angles (85/85/85/85) |
Pin Number: | 40 Pins |
Connection: | Plugging |
Surface Luminance: | 300 Cd/m2 |
Supply Power: | 3.3 V |
Current Consumption: | 20 mA |
Operating Temp.: | -20℃ To +70℃ |
Life Time: | 40000 Hrs |
Compliance: | REACH & RoHS Compliant |
4" TFT LCD, Square TFT 4 inch LCD Drawing
Pin No. | Symbol | Description | When not in use | |||
1 | LEDA | B/L positive pin | — | |||
2 | LEDK | B/L negative pin | — | |||
3 | LEDK | B/L negative pin | — | |||
4 | GND | Ground | — | |||
5 | VCI | Power supply (2.8-3.3V) | — | |||
6 | IOVCC | I/O power supply (1.8-3.3V) | — | |||
7 | TE | Tearing effect output | Open | |||
8 | CS | Chip selection pin. Low-active. | — | |||
9 | RS | Display data/command selectionDCX=’ 1’ : display data or parameter. DCX=’0’ : register index / command. | — | |||
10 | WR/SCK | Write enable in MCU interface.In SPI mode, this pin is sck | — | |||
11 | RD | Read enable | GND | |||
12 | SDI | SPI interface input/output pin. | — | |||
13 | SDO | SPI interface output pin. | — | |||
14 | GND | Ground | — | |||
15-30 | D0-D15 | Horizontal sync input | GND | |||
31 | RESET | This signal will reset the device and it must be applied to properly initialize the chip | — | |||
32 | IM2 | IM0=0 | IM2=0 | MCU 16 BIT | D[ 15:0] is used | — |
IM0= 1 | IM2=0 | MCU 8 BIT | D[7:0] is used | |||
33 | IM0 | IM0= 1 | IM2= 1 | 4Line SPI | CS,RS,SCK.SDI | — |
IM0=0 | IM2= 1 | Reserve | – | |||
34 | GND | Ground | — | |||
35 | TP_INT | TP Interrupt to the host | Open | |||
36 | TP_SDA | TP I2C data input and output | Open | |||
37 | TP_SCL | TP I2C clock input | Open | |||
38 | TP_RES | TP external reset, Low is active | Open | |||
39 | TP_VCI | TP power supply (2.8-3.3V) | Open | |||
40 | GND | Ground | — |
FACTORY AND FACILITIES
Search keyword: tft 4", 4 tft lcd, 4" tft lcd, 4 inch tft lcd, tft
lcd 4, 4 tft display, 4" tft display, 4 inch tft display, tft
display 4 inch, tft display 4", 4 inch tft lcd display, 4" tft
screen, 4 inch tft screen, tft screen 4 inch, tft screen 4", 4 inch
tft lcd screen, 320x320 TFT, 4 inch IPS, 4 inch 320x320 dots, 4
inch mipi LCD