Medication Powder Dosing Machine For Filter Press Device 30-180L

The Powder dosing machine is widely used in the waste water treatment, it can mix the compounds continuously and effectively, so the reactive polymer solution appears.

1. Fully automatic operation &integrated with automatic dosing, dissolving and feeding.
2. The highly precise of Powder dosing machine and the well-designed heater device can prevent the polymer from caking.
3. The dosage of dry polymer and water can be adjusted, so the concentration of the solution can be prepared purposely.The electric control cabinet can control the whole process, and it will alarm to warn the operator to add polymer powder when the powder reach low position.
4. Tank material: SS304 or SS316, Polypropylene PP, FRP etc.

These main components of the machine: Polymer feed machine (including material hopper), Dry powder infiltration device, Tank, Level controller, Mixer, Dosage water inlet pipe, Electric control panel.

Polymer dosing device

Polymer dosing device is composed of hopper, push screw, electric heater and etc. The effective volume of the hopper can meet the dosage for a long time which is equipped with sight glasses for observing material level monitored by the dry powder level meter. The push screw driven by the high-precision reducer can satisfy the dosage. The electric heater can be installed in the discharge pipe of push screw, and it can prevent the powder from caking.

Polymer dissolving device

Polymer dissolving device is composed of pre-soaking device, tank, and 3 sets of mixers. The pre-soaking device is to infiltrate and mix the polymer powder in advance. The 3 tanks are precast mixing tank, homogeneous slaking tank and solution storage tank, in which there is a mixer correspond to guarantee the homogeneity.

Water supply device

Water supply device is composed of pipeline, manual ball valve, filter, pressure gauge, solenoid valve, stop valve, and the rotor flow meter, etc.

The preparation process of PAM powdered reagent solution is gradually completed through the grading of each solution tank. The solution tanks are separated to ensure the best reaction time and constant concentration in each solution tank, avoid any direct path between the prefabrication tank and the solution storage tank, and the automatic control system is connected with the liquid level controller on the storage tank. Once the liquid level reaches the low level, the water inlet solenoid valve will be triggered to open, the drying machine will start, and the equipment will automatically run. When the liquid level reaches the highest point, this cycle process will stop. Of course, the mixer will continue to work according to the set time.

Powder dosing machine can be widely used in many industries, such as: paper making, textile, aquaculture, and so on, especially for wastewater treatment.

Matching chamber filter press and belt filter press.