

Add to Cart
The packaged containerized FI-FI system is a standard FIFI set
designed as a mobile FiFi set. We have 600m3/h, 1200m3/h and 1800m3/h three different capacity models available. Each unit is
installed with one unit diesel engine driven fifi pump set and one
unit remote control fifi water monitor. The diesel engine is
mechanical diesel engine from Cummins Made In China. It is
especially good because the mechanical engine continues to run if
there is an electrical failure in salt laden sea water
environments. And the fifi monitor is SS316L which is good in sea
water corrosion resistant.
Containerized type fire fighting system is putting the diesel
engine pump set, fire monitor and control system etc together in
one sturdy stainless steel frame. Therefore it can be transported
either by forklift or using the corner hoists points. It is also
equipped with a simple relay control panel which completes the
containerized fifi system, making it a real workhorse among
external FiFi sets. With the innovative feature making an excellent
NPSH, the suction height of the fifi water pump can be 5.0m without
priming pumps, suction line check valves and submersible pumps.
This system consists of a V-belt driven vacuum pump which will
prime the pump in approx. 60 seconds with engine at idle speed and
the vacuum pump witches off when the fifi water pump pressurizes
and the movable fifi set is ready to operation. It is fitted with a
remote operated fifi water monitor (electrical motor or hydraulic
motor driven) which can rotate 360o horizontal and vary between a long range main jet or a water spray
pattern. In additional, there are 5*DN150 fire hose connections.
The FI-FI system is including following core components:
1. Fire pump ( It can be driven by independent diesel engine, for
above 2400m3/h, we recommend to drive by main engine to save space)
2. Fire monitors (Remote control, 360 degree rotation, jet and fog
spray type)
3. Control system
4. Foam propotioner (Optional)
5. Water curtain system (Optional)
Model | MK200 | MK330 | MK500 |
Capacity(m3/h) | 600 | 1200 | 1800 |
Pressure(Bar) | 12 | 12 | 12 |
Throw Range(m) | 120 | 150 | 170 |
Throw Height(m) | 50 | 65 | 75 |
Outlet Flange | 8*DN80 / 2*DN150 | 10*DN80 1*DN150 1*DN200 | 8*DN100 / 2*DN200 |
AFFF Inlet Flange | DN50 | DN80 | DN100 |
Medium | Water & AFFF | Water & AFFF | Water & AFFF |
Pump Inlet Flange | 3*DN150 | 5*DN150 | 5*DN200 |
NPSHr | 3.5-5m | 3.5-5m | 3.5-5m |
Horizontal Rotation | +175°/-175° | +175°/-175° | +175°/-175° |
Elevation Rotation | -10°/+70° | -10°/+70° | -10°/+70° |
Diesel Engine | NTA855 / TBD314 / C15ATAAC | KTA19 / TBD604 / C27ATAAC | KTA38 / TBD620 / C32ATAAC |
Self Weight | 6T | 8T | 11T |
Optional | 1. Trailer 2. Automatic unload shelter |
1. Sea water corrosion resistant stainless steel 316L material for
packaged fifi system fire water monitor.
2. Bronze impeller and stainless steel shaft for containerized fifi
pumps.
3. Remote control for water monitor and control panel for fifi
pumps and fifi monitors.
4. CCS, BV, ABS, DNV-GL etc certificates for vessel application.
5. Wide flow range 600m3/h to 1800m3/h for choosing.
6. The maximum horizontal throwing distance of fire monitor is 170m
and the maximum vertical throwing height can reach 80 meters.
7. Water jet and fog type and flow rate adjustable for different
requirements.
8. Side suction top outlet fifi pumps for compact structure.
9. 200m remote control distance without block.
10. 360o horizontal rotation with limited switch for remote fifi water
monitors.