10-20min Fast Coronavirus Saliva At Home Antigen Test Kit CE FSC
Brand Name:INVBIO
Certification:CE, FSC
Model Number:INV-1045
Minimum Order Quantity:1000 tests
Delivery Time:3-5 days after receiving payment
Payment Terms:T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Beijing Beijing
Address:
sales@rapid-test-kit.com, Room 901 Building #4 Yard No 26, Financial Street Gucheng, Shijingshan District, Beijing China
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
Covid -19 Ag saliva rapid test kit
Product Description
Accurate Home use test kit SARS-CoV-2 Coronavirus Covid 19 Antigen
saliva rapid test kit for self testing
COVID-19 Ag Rapid Saliva Test Device is a rapid
chromatographicimmunoassay for the qualitative detection of N
antigen from SARS-CoV-2 present in human saliva within the first 7
days of symptom onset. This test is for professional used only, as
an aid toearly diagnosis of SARS-CoV-2 infection in patient.The
result of this test should not be the sole basis for the diagnosis;
confifirmatory testing is required
Date Sheet
| Product name: | Covid -19 Ag saliva rapid test kit |
| Format: | Card |
| Specimen: | Saliva |
| Sensitivity: | 95.6% |
| Accuracy: | 98.21% |
| Specificity: | 99% |
| Packing | 25pcs/box; 5pcs/box; 1pcs/box |
| shelf life | 2years |
| Certificate: | CE , FSC |
Directions for Use
Do not place anything into the mouth including food, drink, gum, or
tobacco products for at least 10 minutes prior to collection of
saliva specimen.
1. Remove the swab from the sealed pouch.
2. Cough deeply twice before collecting the samples.
3. Insert the sponge end of the collector into the mouth. Then swab
back and forth along the gum line from one end to the other end of
the upper and lower gum for 3 to 5 times. Then slowly scrape the
cheek inside the mouth for 3 to 5 times and slowly scrape the
tongue surface for 3 to 5 times.Then put the collection pad on the
tongue for 1 minutes
4. Open the lid of the collection tube. Remove the saturated
collector pad out of the mouth and place it into the tube which
contains 1 ml sample extraction buffer, and then fully stirred
along the wall of the tube. Break off the collector, leaving the
sponge end of the collector in the chamber.
5. Tighten the lid of the collection tube and mixing liquid of the
chamber well before using (Shaking up and down for about 20 times).
Allow the test, specimen, extraction buffer to equilibrate to room
temperature (15-30°C) prior to testing.
1. Remove the test device from the sealed foil pouch and use it as
soon as possible. Best results will be obtained if the assay is
performed immediately after opening the foil pouch.
2. Put the test device on a clean and level surface.
3. Shake the swab specimen in the extraction vial to well mix.
4. To run test, twist open the bottom screw cap of the extraction
vial to expose dropper tip.Transfer 3 drops (~90μl) of the specimen
to the sample well of the test device and make sure a colored
liquid appearing in the detection window in 30 seconds. Replace cap
cover on the extraction vial.
5. Start timer. Read the result at 10~20 minutes. Do not interpret
the result after 20 minutes.
Interpretation of Results
NEGATIVE:
Only one red band appears in the control region (C), and no band in
the test region (T). The negative result indicates that there are
no Novel coronavirus antigen in the sample or the number of viral
particles is below the detectable range.
POSITIVE:
Two red bands appear. One red band appears in the control region
(C), and one red band in the test region (T). The shade of color
may vary,but it should be considered positive whenever there is
even a faint band.
INVALID:
No red band appears in the control region (C). The test is invalid
even if there is a band on test region (T). Insufficient sample
volume or incorrect procedural techniques are the most likely
reasons for control line failure. Review the test procedure and
repeat the test using a new test device
Company Information
Innovation Biotech (Beijing) Co., Ltd. is a biotechnology company specializing in research, development and manufacturing of advanced medical in-vitro diagnostic (IVD) rapid test kits, medical and laboratory disposal products. We provide one step medical diagnostic rapid test kit based on our INVBIO brand, Product include Fertility Tests, Tumor markers, DOA drug of abuse test, Drug test cup, Urinalysis reagent strip, ELISA kit, Digital alcohol tester, urine analyzer, et.
OEM packaging is available, drug of abuse test, troponin I test, alcohol screening saliva test strips, urine strips, elisa kits, microscope slides
Our focus is to expand our markets internationally by forming strategic alliances and entering into partnerships with distributors worldwide. We have established an international reputation for excellence in the manufacturing of quality medical and laboratory products. In addition, we have obtained approval licenses ISO13485, FSC certificate, and most of our products get CE mark Our objective is the utmost satisfaction of our clients all around the world by supplying our quality and economical products
Certifications
FAQ
Q: What is your payment terms?
A: Payment terms: 100% TT before shipment
Q: Can you send samples?
A: Yes,SAMPLES can be sent for your evaluation.customer pay the freight charge
Q: Do you give any discount?
A: I'll surely try my best to help you get those by the best price
and good service at the same time. We promise the best price upon
same quality, and best quality upon same price.
Q: How to order?
A: Please tell us the model and quantity and package requests.
b. Proforma Invoice confirmed, the order will be arranged upon
receipt of your payment.
c. Confirm and ship the goods.
d. We will help to track your goods until you receive them safely.
10-20min Fast Coronavirus Saliva At Home Antigen Test Kit CE FSC
Inquiry Cart
0