PQWT BT Water Leak Detector Tool Plumber Leak Detector MultiFunction Wireless 3 In 1

PQWT-BT Series Multi-Function Wireless 3-In-1 Water Leak Detector Tool Plumber Leak Detector

PQWT-BT10 (Acoustic leak detection) ​
PQWT-BT20 (Acoustic +Gas leak detection)
​PQWT-BT30(Acoustic +Gas +pipeline locator)

Introduction

PQ - BT series wireless multifunctional leak detector is a new generation of multifunctional wireless leak detector independently researched and developed by our institute, specifically for detecting pressure pipeline leakage and pipeline direction.
This series of instruments can effectively and conveniently solve the leakage problem of external pressure pipeline by collecting and analyzing the sound and signal of leakage or the gas of the pipeline leak. By installing a sound device at the pipeline interface, it can also accurately locate the location and direction of underground metal and non-metal pipelines. It is suitable for inspection of leaks and pipeline directions of tap water, fire fighting, and heating pipelines on the external network.





Operating Principle

Acoustic Detection Function: By using the sensor to collect the sound and display signal of pipeline leakage, the collected signal is sent to the host wireless, after the host signal is processed, it is displayed on the host interface in the form of signal columns and values. At the same time, the sound will also be sent to the wireless headset through the host , Through the combination of "listening" and "seeing" two ways to analyze and determine the leaking point.

Gas Detection Function: By injecting hydrogen and nitrogen mixed gas into the pipeline, use a dedicated hydrogen sensor to collect and analyze the leaked hydrogen, detect the leaked hydrogen content, display it on the host interface in the form of signal columns and values, and observe the size changes of the hydrogen content. When the measured position signal column is the highest and the value is the largest, it can be judged that the position is a pipeline leak.

Pipeline Locating Function: When the direction of the pipeline is unknown, a sounding device can be installed at the pipeline interface. The device generates a specific sound wave signal mixed with multiple frequencies in the pipeline. The signal is transmitted horizontally along the pipeline in both directions and vertically transmitted to the ground, using the host and the sensor collect this specific sound wave signal on the ground and analyze its strength to accurately locate the orientation and direction of underground metal and non-metal pipelines.



Main Components Introduction

Host machine


① Strap buckle: used to connect the host strap, easy to carry.
② Power button: Press and hold for 3 seconds to power on or off.

③ USB charging hole: use when charging with USB or when connecting to a computer.
④ Spare wired earphone jack: Use when using wired earphones.
⑤ Microphone: Recording mode, used when recording human voice.
⑥ Spare wired hole: It is used when the handle is wired with the host.
⑦ SD card slot: used for system upgrade, storage of recording files, picture files.

⑧ Power charging indicator: it is always green when the device is turned on, and turns off when it is turned off. Red is always on when charging, and goes off when fully charged.
⑨ Reset key: The host system resets and shuts down.
⑩ Battery compartment: where the battery is placed.

Wireless Earphone


①Volume+: Increase the volume, ten levels can be adjusted.
②Volume-: Decrease the volume, adjustable in ten steps.
③ Indicator light: at the power switch, blue.
④ Power switch: long press to turn on or off.
⑤ Mirco USB charging: USB charging hole.
⑥ 3.5mm audio jack: used when connecting audio cable.


Case show




About us

Hunan Puqi Water Environment Institute Co., Ltd. is the professional institution in China who engaged in the R & D, manufacturing and sales of pipe water leak detector, leakage automatic analyser, geophysical prospecting underground water detector, cavity detector, mine locator, dam piping detector, borehole inspection camera and pipeline detector.

Over the years, PQWT focuses on Hydrogeological exploration, Intelligent data-capture technology and Application of special technique, carrying out Scientific research, Technical services and Marketing application. We have completed more than 65 items including National ministries, Sino-foreign cooperation and major scientific research projects. Having the honour to win a number of national research awards, with more than 117 national patents.

PQWT is a research institute specializing in researching and developing of water leak detector and geological exploration equipment

Hunan Puqi Geologic Exploration Equipment Institute and Hunan Puqi Water Environment Research Institute were established in May 2006; Puqi Institutes mainly engaged in the research and development of following area: geophysical exploration, pipeline network loss reduction, disaster prevention and mitigation, earthquake warning, ground penetrating communication, smart pipeline and life searching.

In recent years, a total of hundreds of millions of yuan has been invested in research and development of scientific research projects and the construction of talent teams. Adhering to the strategic goal of "invigorating science and technology and strengthening talents", Puqi Institues cooperated and established a long-term cooperative relationshipwith many national scientific research institutions,colleges and universities, and undertaken a number of national scientific research projects. Puqi Institues jointly established the "13th Five-Year National Water Special R&D Base" with Harbin Institute of Technology;

In 2016, Puqi was listed on CCTV's list of brands. In 2017, Puqi Industry-University-Research Innovation Fund was established. Puqi products have been exported to 154 countries. In 2019,Puqi won the second prize of Hunan Province Science and Technology Progress Award. By 2020, Puqi has declared more than 300 national patents and software copyrights.