400W 1KW MOVELASER Wind Speed Measurement 30m Distance Resolution

Brand Name:MOVELASER
Model Number:Molas 3D
Minimum Order Quantity:1 set
Delivery Time:1-2 months
Payment Terms:L/C, D/A, D/P, T/T
Place of Origin:China
Contact Now

Add to Cart

Verified Supplier
Location: Nanjing China
Address: Building B2, Hongfeng Science Park, Kechuang Road,Nanjing
Supplier`s last login times: within 36 hours
Product Details Company Profile
Product Details

Within 400W at normal temperature, within 1kW at extreme temperature Wind Lidar


1,Product introduction


Traditional detection methods for wind shear, such as low-level wind shear early warning systems based on surface anemometers, Doppler weather radar terminals, wind profilers based on atmospheric turbulence, etc. There are certain limitations or defects in the adaptability of the surrounding weather and climate environment. Most of the terrain-induced wind shear accidents occur in clean air conditions. The Doppler weather radar equipped in the past is more suitable for thunderstorms. The signal reception is not always effective in clear weather and clean air conditions, and the wind speed data is not coherent enough. The measured wind shear data in the sector does not necessarily represent the true data in the direction of the flight path.


2,Performance parameters


Basic parameters
Line-of-sight detection distance10km (typical case)
Distance resolution30m/45m/60m/75m optional
Accumulation time0.5s/1s/2s/4s/8s optional
Radial wind speed measurement range-75~+75 m/s
Radial wind speed measurement accuracy0.1m/s
Number of distance layersup to 300
Horizontal scan range360° × n
Vertical scan range-10°~190°
Pointing accuracy0.1°
Scanning methodPPI , RHI , DBS , LOS and Program Scan
Real-time data output formProfibus DP/Modbus TCP/CAN optional
Telecommunication1000BASE-TX or 4G remote access
Environmental parameters
Operating temperature and humidity-25~+50℃ (extendable to -40~+60℃),
5%~100% RH
IP protection classHousing IP54, core module IP66
Anticorrosion gradeC4
Survival wind speed70m/s (fixed by foot or by wire rope)
Working altitude≤3500m
Other parameters
Running power consumption≤1kW
Powered by110VAC±20% or 220VAC±20%,
50Hz±10%
Size800mm*650mm*11
30mm
Weight≤150kg
Accessibility
GNSS functionalitySupport GPS/Beidou
Time serviceNTP timing or GPS/Beidou timing

3,Schematic diagram of 3D scanning Doppler wind Lidar


China 400W 1KW MOVELASER Wind Speed Measurement 30m Distance Resolution supplier

400W 1KW MOVELASER Wind Speed Measurement 30m Distance Resolution

Inquiry Cart 0