Add to Cart
SHX 280kw Power Diesel Generator 350kva 3 Phase Generator 385kva Backup Generator
General Feature
Genset Specifications
Genset model | SCL385 |
Genset rated power | 280KW / 350KVA |
Rated voltage | 230V / 400V (adjustable) |
Rated current | 504 Amps |
Frequency | 50 Hz |
Power factor | 0.8 Lagging |
Connecting type | 3 phase 4 wire |
Cooling system | Closed cycle water-cooled with fan, water tank |
Overall dimension (L×W×H) mm | 3000×1000×1750 |
Weight (kg) | 2500 |
Engine Specifications
Diesel Engine | |
Brand | CCEC CUMMINS |
Model | NTA855-G2A |
Engine structure | 6 cylinders vertical in line, 4 stroke, turbocharged |
Rotating speed | 1500 RPM |
Engine cooling method | Water-cooled |
Speed governing system | Electronic speed governor |
Starting method | By 24V batteries |
Engine filter system | Dry type air filter ,fuel filter, oil filter, water filter |
Displacement(L) | 14 |
Bore×Stroke(mm) | 140×152 |
Compression ratio | 14: 1 |
100% Load fuel consumption (litre/h) | ≤67 |
Lube capacity(L) | 36 |
Alternator Specifications
Alternator | |
Brand | LEROY SOMER |
Model | TAL-A46-H |
Excite type | Brushless self-excited AVR regulation |
Connecting type | 3 phase 4 pole |
Steady frequency change | 0.50% |
No load voltage | ≥95%-105% |
Steady voltage | ≤±1% |
Insulation class | Class H |
Protection grade | IP23 |
Control Function
Key start / auto start
Monitoring meters: Current; Frequency; Wire Voltage; Genset KVA;
Genset KW; Output
Capacity; Output KW.H; Power Factor.
Warning/Shutdown: Alternator Under/Over Volts, Frequency;
Under/Over Speed; Low Oil Pressure; High Engine Temp; High/Low
Battery Volts; Over Current; Earth Fault Shutdown.
INSPECTION AND TEST
1 GENERAL
1.1 Each engine shall be tested at manufacturer’s workshop to certify the engine output and fuel consumption in accordance with the site operating condition specified by purchaser on the specification datasheet.
1.2 All relevant information drawings pertinent to the testing and test procedure shall be transmitted to the purchaser in advance of the test date notification.
1.3 The purchaser shall call for additional testing if test results are unsatisfactory or marginal. Any equipment rejected shall be repaired or replaced to the purchaser’s satisfaction and tests shall be repeated.
1.4 Any unsatisfactory material, equipment, installation, or workmanship shall be replaced or repaired to the purchasers satisfaction at the manufacturer’s cost.
1.5 The engine and generator shall be tested individually in accordance with relevant standards specified above.
1.6 The completed and individually tested engine and generator shall be assembled onto the base plate with all auxiliaries, instruments and controls for a complete test of the generator set.
Tag: cummins diesel engine generators, cummins diesel genset, cummins backup generator