Add to Cart
Electric 380V Poultry Scraper Type Manure Removal Machine Emily
Introduction of manure removal machine
The scraper manure removal is mainly used in the poultry farm which
have the manure pool
It can improve the efficiency and reduce manpower cost, keep a good
indoor air environment for animals, reduce the incidence of the
disease
Specification of manure removal machine
Product name | Electric 380v poultry scraper type manure removal machine |
Key word | Scraper manure removal, manure removal machine, manure cleaning machine |
Application | Chicken farm, pig farm or cow farm |
Components | Control cabinet, drive motor, scrapers, ropes and wheels |
Power source | Electric |
Voltage | 380V |
Power | 3KW |
Corner material | Hot galvanized steel sheet |
Rope material | High strength chemical fiber |
Scraper | Hot deep galvanized steel sheet |
Features of scraper manure removal machine
1. Special design for A frame cage system with manure pits under
the cages, the scraper widths suitable for cage width
2. Lower cost and easily to operate by control panels
3. Easily to install and make maintenance during the use
4. Solid structure and durable because of hot dipped galvanized
manure scrapers and imported Nylon connection ropes
5. It can be used in different A frame cage systems as layer,
pullet, broiler and breeding chickens in close or open house
6. Saving more labor works and cleaning the chicken house inside
immediately in order to control the ammonia emission
Maintenance of manure removal machine
1. Before use, add 30# engine oil to the middle of the oil window
for the cycloid reducer, add 1.2-1.5 liters of 50# engine oil for
the turbo reducer, and replace the engine oil every three months
2. The manure board is cleaned 2-3 times a day, and the manure
ditch is too long to increase the number of manure cleaning
3. During normal operation, check the lubricating oil once a week,
add it when it is insufficient, and drip lubricating oil to the
transmission chain once a week
4. Check the chain tightness every month. It is advisable for the
middle part of the chain to sag by 3-5 mm. After loosening and
adjusting the fastening bolts, tighten the bolts and top wire
5. Check the manure scraping board every week, and clean up the
feces accumulated on the board in time