High Sensitivity 25T 40T cronovirus 19 Antibody Test Kit Disease IgG IgM Test Cassette
Brand Name:Citest
Certification:CE
Model Number:INCP-402/ICOV-402
Minimum Order Quantity:N/A
Delivery Time:2-4 Weeks
Place of Origin:-
Contact Now
Add to Cart
Verified Supplier
Location:
Hangzhou Zhejiang
Address:
170-422, Richards Street, Vancouver BC V6B 2Z4, CANADA
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
COVID-19 IgG IgM Rapid Test Disease Testing Cassette High Sensitivity, Antibody Rapid Test
Application
| Principle | Chromatographic Immunoassay |
| Format | Cassette |
| Specimen | WB/S/P |
| Certificate | CE |
| Reading Time | 10 minutes |
| Pack | 25T/40T |
| Storage Temperature | 2-30°C |
| Shelf Life | 2 Years |
A rapid test for the qualitative detection of IgG and IgM
antibodies to 2019-nCoV in human whole blood, serum or plasma
specimens.
For professional in vitro diagnostic use only.
INTENDED USE
The 2019-nCoV IgG/IgM Rapid Test Cassette is a lateral flow
chromatographic immunoassay for the qualitative detection of IgG
and IgM antibodies to 2019-nCoV in human whole blood, serum or
plasma specimen.
PRINCIPLE
The 2019-nCoV IgG/IgM Rapid Test Cassette (Whole
Blood/Serum/Plasma) is a qualitative membrane-based immunoassay for
the detection of IgG and IgM antibodies to 2019-nCoV in whole
blood, serum or plasma specimen. This test consists of two
components, an IgG component and an IgM component. In the IgG
component, anti human IgG is coated in IgG test line region. During
testing, the specimen reacts with 2019-nCoV antigen-coated
particles in the test cassette. The mixture then migrates upward on
the membrane chromatographically by capillary action and reacts
with the anti-human IgG in IgG test line region, if the specimen
contains IgG antibodies to 2019-nCoV. A colored line will appear in
IgG test line region as a result of this. Similarly, anti human IgM
is coated in IgM test line region and if specimen contains IgM
antibodies to 2019-nCoV, the conjugate-specimen complex reacts with
anti-human IgM.
A colored line appears in IgM test line region as a result.
Therefore, if the specimen contains 2019-nCoV IgG antibodies, a
colored line will appear in IgG test line region. If the specimen
contains 2019-nCoV IgM antibodies, a colored line will appear in
IgM test line region. If the specimen does not contain 2019-nCoV
antibodies, no colored line will appear in either of the test line
regions, indicating a negative result. To serve as a procedural
control, a colored line will always appear in the control line
region, indicating that the proper volume of specimen has been
added and membrane wicking has occurred.
PRECAUTIONS
1. This package insert must be read completely before performing
the test. Failure to follow directions in insert may yield
inaccurate test results.
2. For professional in vitro diagnostic use only. Do not use after
expiration date.
3. Do not eat, drink or smoke in the area where the specimens or
kits are handled.
4. Do not use test if pouch is damaged.
5. Handle all specimens as if they contain infectious agents.
Observe established precautions against microbiological hazards
throughout all procedures and follow the standard procedures for
proper disposal of specimens.
6. Wear protective clothing such as laboratory coats, disposable
gloves and eye protection when specimens are assayed.
7. Please ensure that an appropriate amount of samples are used for
testing. Too much or too little sample size may lead to deviation
of results.
8. The used test should be discarded according to local
regulations.
9. Humidity and temperature can adversely affect results.
SPECIMEN COLLECTION AND PREPARATION
- The 2019-nCoV IgG/IgM Rapid Test Cassette (Whole Blood/Serum/Plasma) can be performed using whole blood (from venipuncture or fingerstick), serum or plasma.
- To collect Fingerstick Whole Blood Specimens:
- Wash the patient’s hand with soap and warm water or clean with an alcohol pad. Allow to dry.
- Massage the hand without touching the puncture site by rubbing down the hand towards the fingertip of the middle or ring finger.
- Puncture the skin with a lancet. Wipe away the first sign of blood.
- Gently rub the hand from wrist to palm to finger to form a rounded drop of blood
DIRECTIONS FOR USE
Allow the test, specimen, buffer and/or controls to reach room
temperature (15- 30°C) prior to testing.
1. Remove the test cassette from the foil pouch and use it within
one hour. Best results will be obtained if the test is performed
immediately after opening the foil pouch.
2. Place the cassette on a clean and level surface. For Serum or
Plasma specimen:
To use a dropper: Hold the dropper vertically, draw the specimen to
the fill line (approximately 10uL), and transfer the specimen to
the specimen well (S), then add 2 drops of buffer (approximately
80uL), and start the timer.
To use a pipette: To transfer 10 uL of specimen to the specimen
well(S), then add 2 drops of buffer (approximately 80 uL), and
start the timer
For Venipuncture Whole Blood specimen:
To use a dropper: Hold the dropper vertically, draw the specimen
about 1 cm above the fill line and transfer 1 full drop (approx.
20μL) of specimen to the sample well(S). Then add 2 drops of buffer
(approximately 80 uL) and start the timer.
To use a pipette: To transfer 20 uL of whole blood to the specimen
well(S), then add 2 drops of buffer (approximately 80 uL), and
start the timer
For Fingerstick Whole Blood specimen:
To use a dropper: Hold the dropper vertically, draw the specimen
about 1 cm above the fill line and transfer 1 full drop (approx.
20μL) of specimen to the sample well(S). Then add 2 drops of buffer
(approximately 80uL) and start the timer.
To use a capillary tube: Fill the capillary tube and transfer
approximately 20uL of fingerstick whole blood specimen to the
specimen well (S) of test cassette, then add 2 drops of buffer
(approximately 80 L) and start the timer. See illustration below.
3. Wait for the colored line(s) to appear. Read results at 10
minutes. Do not interpret the result after 20 minutes.
INTERPRETATION OF RESULTS
IgG POSITIVE:* Two colored lines appear. One colored line should
always appear in the control line region (C) and another line
should be in the IgG line region.
IgM POSITIVE:* Two colored lines appear. One colored line should
always appear in the control line region (C) and another line
should be in the IgM line region.
IgG and IgM POSITIVE:* Three colored lines appear. One colored line
should always appear in the control line region (C) and two test
lines should be in the IgG line region and IgM line region.
*NOTE: The intensity of the color in the test line regions may vary
depending on the concentration of 2019-nCoV antibodies present in
the specimen. Therefore, any shade of color in the test line region
should be considered positive.
NEGATIVE: One colored line appears in the control line region (C).
No line appears in the IgG region and IgM region.
INVALID: Control line fails to appear. Insufficient specimen volume
or incorrect procedural techniques are the most likely reasons for
control line failure. Review the procedure and repeat the test with
a new test. If the problem persists, discontinue using the test kit
immediately and contact your local distributor.
QUALITY CONTROL
Internal procedural controls are included in the test. A colored
line appearing in the control region (C) is an internal procedural
control. It confirms sufficient specimen volume and correct
procedural technique. Control standards are not supplied with this
kit; however, it is recommended that positive and negative controls
be tested as a good laboratory practice to confirm the test
procedure and to verify proper test performance
High Sensitivity 25T 40T cronovirus 19 Antibody Test Kit Disease IgG IgM Test Cassette
Inquiry Cart
0