Depth 12-15m Excavator Vibratory Pile Hammer NM400 Excavator Attachment

30ton Drilling Depth 12-15 Meter Excavator Hydraulic Vibratory Pile Drive Hammer Wholesaler

YAKAI Vibra Hammer Introduction

A vibratory hammer is made of three main sections, separately are the Vibro hammer, Vice Arm, and Extension Arm (optional). It would Quickly Push the Metal Sheet, Pipes, or Other Stuff into the Soil by Producing Vertical Power.

Pullable steel sheet piles, cement piles, rail piles, iron plates, H steel, steel pipes

Vibration pile driver built-in two eccentric shafts, hydraulic motor drive, produce high-speed rotation and vertical vibration force, through the damping rubber block, maintain a certain amplitude, can cope with various types of soil and piling requirements.

Excavator Vibro Hammer Working Principle

The vibrating pile driver uses its high-frequency vibration to vibrate the pile at high speed and transmits the vertical vibration generated by the machine to the pile, causing the soil structure around the pile to change due to vibration, and the strength is reduced, and the soil around the pile is liquefied. Thereby reducing the frictional resistance between the pile body and the ground, and then sinking it into the soil by vibratory piling and the weight of the pile body.

Factory Produce Process:

Sheet Pile Vibro Hammer Specification:

* The Parameter above may change with the technology improvement, will not notice additionally, please understand.

YAKAI Pile Sheet Hammer Features

• High efficiency: construction speed is much faster than other pile driving machinery than a pneumatic hammer, diesel hammer efficiency is 40%-100% higher.
• Functions: hydraulic pile driver can build a thin-walled cutoff wall, deep compaction treatment, ground compaction treatment, and other special construction.
• Wide range: almost suitable for any harsh geological conditions under the construction, can easily penetrate the pebble layer, sand layer, and other soil.
• Built-in motor and gears can effectively avoid motor and gears getting collision and dirt getting into the motor.

YAKAI Extension Boom

Pile Driver Extension Boom, Also Known as Vice Arm, is the Connection Boom between Pile Sheet Hammer and Excavator. We have two designs for Extension Boom. One is a Valve Located near to External Cover of the Excavator, Second Design is Control Center Built-in Extension Boom that Would Make the Installation Easier.

The Following Picture is Valve's Built-in Vice Arm.

*If you have a demand for a longer extension boom, we could offer a customized Extension Arm at extra cost.

Vibro Hammer Clamp

We have various design clamps for different working conditions:

• for Photovoltaic
• for Cement
• for Cement Cuboid
• Metal Steel
• Cement Mixing Pile
• Cement Round Pile
• Cement Cuboid Pile

Vibratory Hammer Real Work shot

The vibratory pile method is more efficient than other methods. It is mainly suitable for all kinds of sheet piles, I-steel piles, cement square piles, cylinder piles, guardian piles, and so on.

Hydraulic pile driver can be used to build piles, and holes, and also can be used for high-speed railway construction; through pebble layer, sand layer, and other soil types

The hydraulic pile driver suit for municipal, bridge, cofferdam, building foundation, and other short pile engineering.

Excavator Pile Sheet Hammer Operation Process

1. Hanging pile hammer
2. Check the surroundings and machine
3. Verticality the objects going to be pulled, then clamp it to move to the right position
4. Put down the pile driver and make it slowly push into the soil to a certain depth (if necessary, install the pile cap)
5. Check the pile position and axis
6. Move the pile driver to the next pile to continue the operation.

Yakai Precision Machinery (Yantai) Co., Ltd

Yakai Precision Machinery is a trading company that mainly exports excavator attachments and

other construction equipment in China, founded in 2013.

Since the found year, we focus on exporting hydraulic attachments. has more than 10 years of experience in the machining field. Yakai can export many other products and help our customers source most kinds of products in China, not only limited to excavator attachments.

Currently, our main products are Hydraulic Breaker Hammer, Quick Hitch, Auger Drill, Hydraulic Plate Compactor, Hydraulic Grapple, etc.

Widely apply on excavators, skid steer loaders, backhoe loaders, and other hydraulic machines.

Yakai company has registered DAYAN.HB is our exported brand.

We always hold the service tenet of Client first, Quality first in our mind, and are strict with the Quality inspection process.

Yakai Welcome Your Visit!