8% Cobalt Drill Blanks Fine Grain Size Solid Carbide Rod With Hole
Brand Name:OUQI
Certification:ISO 9001: 2015
Model Number:Finished ground end mills blank
Minimum Order Quantity:10pc
Delivery Time:Standard products in one week
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Site Member
Location:
Zhuzhou Hunan China
Address:
Block B, building 4, Area B, Hi Tech New Makin Valley Xiangyuehuan Road, Tianyuan District, Zhuzhou, Hunan, China
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
10mm in diameter and length 50mm fixed length carbide rods for endmills
Specification:
OD Ø10mm -0.009
Length 50mm +0.5
Chamfer 45°
Type: h5 ground solid carbide cut to length rods.
Finished ground Ra 0.2
Application:
with high wear resistance and high hardness, suitable for finishing of steel, cast iron.
| Diameter mm | Length mm | Diameter mm | Length mm | |||||
| D | Tolerance | L | Tolerance | D | Tolerance | L | Tolerance | |
| 1.60 | +0/-0.006 | 20 | 0/+0.5 | 10.00 | +0/-0.009 | 50 | 0/+0.5 | |
| 2.35 | 30 | 0/+0.5 | 10.00 | 70 | 0/+0.5 | |||
| 2.35 | 45 | 0/+0.5 | 10.00 | 72 | 0/+0.5 | |||
| 3.00 | 60 | 0/+0.5 | 10.00 | 75 | 0/+0.5 | |||
| 4.00 | +0/-0.008 | 40 | 0/+0.5 | 10.00 | 80 | 0/+0.5 | ||
| 4.00 | 46 | 0/+0.5 | 10.00 | 90 | 0/+0.5 | |||
| 4.00 | 50 | 0/+0.5 | 10.00 | 100 | 0/+0.5 | |||
| 4.00 | 60 | 0/+0.5 | 12.00 | +0/-0.011 | 70 | 0/+0.5 | ||
| 4.00 | 75 | 0/+0.5 | 12.00 | 79 | 0/+0.5 | |||
| 4.00 | 100 | 0/+0.5 | 12.00 | 83 | 0/+0.5 | |||
| 5.00 | 50 | 0/+0.5 | 12.00 | 100 | 0/+0.5 | |||
| 5.00 | 60 | 0/+0.5 | 12.00 | 120 | 0/+0.5 | |||
| 5.00 | 100 | 0/+0.5 | 13.00 | 100 | 0/+0.5 | |||
| 6.00 | 40 | 0/+0.5 | 14.00 | 75 | 0/+0.5 | |||
| 6.00 | 50 | 0/+0.5 | 14.00 | 80 | 0/+0.5 | |||
| 6.00 | 58 | 0/+0.5 | 14.00 | 83 | 0/+0.5 | |||
| 6.00 | 60 | 0/+0.5 | 14.00 | 100 | 0/+0.5 | |||
| 6.00 | 67 | 0/+0.5 | 16.00 | 80 | 0/+0.5 | |||
| 6.00 | 75 | 0/+0.5 | 16.00 | 90 | 0/+0.5 | |||
| 6 | 100 | 0/+0.5 | 20.00 | +0/-0.013 | 100 | 0/+0.5 | ||
| 8 | +0/-0.009 | 50 | 0/+0.5 | |||||
| 8 | 60 | 0/+0.5 | ||||||
| 8 | 63 | 0/+0.5 | ||||||
| 8 | 75 | 0/+0.5 | ||||||
| 8 | 90 | 0/+0.5 | ||||||
| 8 | 100 | 0/+0.5 | ||||||
Our advantage:
For raw material:
Constantly excellent WC powder produced by our own factory.
Spray drying tower and HIP sintering furnace
Cryogenic treatment to remove the internal stress
For grinding:
General h6 rods and h5 or h4 as required
Straightness 0.01-0.05
Circularity 0.01-0.05
General Roughness Ra 0.4, and Ra 0.2 or Ra 0.05 as required.
Available grades are as follows::
| Grade | ISO Code | Grain size μm | Cobalt % | Density g/cm3 | Hardness | T.R.S | ||
| HV30 | HRA | N/mm2 | KPSI | |||||
| YF06 | K05‐K10 | 0.5 | 6.0 | 14.90 | 1850 | 93.5 | 3800 | 553.9 |
| YL10A | K10‐K20 | 0.8 | 8.0 | 14.65 | 1780 | 92.8 | 4200 | 609.5 |
| YL10.2 | K20‐K30 | 0.8 | 10.0 | 14.42 | 1600 | 91.5 | 4000 | 580 |
| XF30 | K30‐K40 | 0.6 | 12.0 | 14.10 | 1700 | 92.5 | 4000 | 580 |
Recommended Application
| Grade | Application |
| YF06 | Suitable for machining composite materials, such as aluminum‐magnesium alloys, plastics, reinforced plastics, carbon, fiber, iron‐based alloys, etc. It is recommended for making big PCB drills of ф3.2‐6.3mm, micro drills of ф0.8‐3.2mm, micro-milling tools and reamers, etc. |
| YL10A | It is suitable for machining cast iron, aluminum alloys, etc. also
for machining common steels. It is recommended for the drilling of cast iron and aluminum alloys. |
| YL10.2 | It is suitable for machining common steel, cast iron, stainless steel, heat‐resistant steel, nickel-based alloys, titanium alloys, etc. It is recommended for making conventional tools, such as twist drills, end drills, screw taps, etc. |
| XF30 | It is suitable for machining titanium alloy, heat‐resistant alloys, stainless steel, hardened steel, grey cast iron,
glass‐fiber Reinforced plastics, composite materials, etc. It is
recommended to make drills and milling tools, etc. |
8% Cobalt Drill Blanks Fine Grain Size Solid Carbide Rod With Hole
Inquiry Cart
0