Multi-color Glue Dispenser Make 3d Keychain Silicone Rubber Patch Dispensing Machine With Custom Logo
Brand Name:Fulund
Certification:CE
Model Number:FLD-24C
Minimum Order Quantity:1
Delivery Time:7days
Payment Terms:T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Active Member
Location:
Dongguan Guangdong China
Address:
China Guangdong Dongguan No.10 New South Road, Hadi village, Nancheng
Supplier`s last login times:
within 10 hours
Product Details
Company Profile
Product Details
Multi-color Glue Dispenser Make 3d Keychain Silicone Rubber Patch Dispensing Machine With Custom Logo
Cheap Dispenser FAQ
Inconsistent glue size
When the glue is inconsistent, it is mainly caused by the
instability of the pressure cylinder or the air pressure that
stores the fluid.
The inlet pressure regulator should be set at 10 to 15psi. lower
than the lowest pressure in the factory. The pressure used in the
pressure cylinder should be above the pressure in the middle of the
pressure regulator. Avoid using the low pressure part of the
pressure gauge. .
The control pressure of the glue valve should be at least 60psi to
ensure stable glue output.
Finally, check the glue time. If it is less than 15/1000 seconds,
it will cause the glue to be unstable. The longer the glue time,
the more stable the glue.
Flow is too slow
If the flow rate is too slow, change the tubing from 1/4” to 3/8”.
The pipeline should be as short as possible if not needed.
In addition to changing the tube, it is necessary to change the
glue port and air pressure, which completely speeds up the flow
rate.
air bubbles in fluid
Excessive fluid pressure combined with too short valve opening time
may infiltrate air into the liquid. The solution is to reduce the
fluid pressure and use a tapered beveled needle.
Application Rang: PVC/Silicon logo, Trademark for garment, footwear outsole/Strap/Vamp, Shoe welting, Cup pad, Silicon keyboard cover, Non-slip mat, Refrigerator Sticker, Disney soft toy, Silicon Key Chain, PVC Zipper puller etc....
Technical parameters:
| Model No. | FLD-24C |
| Machine Size | 1250*1050*1560mm |
| Weight | 420KG |
| Electric Heating Power | 1.6KW |
| Effective Trip | 850*480*80mm |
| Worktable Size | 890*460mm |
Multi-color Glue Dispenser Make 3d Keychain Silicone Rubber Patch Dispensing Machine With Custom Logo
Inquiry Cart
0