Add to Cart
For Making Sandal Silicone Glue Dispensing Machine To Make Rubber Fridge Magnets
Cheap Dispenser FAQ
The most common problem encountered by the glue dispenser is the
valve problem. The following are effective methods to solve the
problems that often occur when the glue valve is used.
Valve dripping This situation often occurs after the valve is
closed. 95% of these cases are due to the use of needles that are
too small in diameter.
A needle that is too small can interfere with fluid flow and cause
back pressure, which can result in dripping shortly after the valve
is closed. A needle that is too small will also affect the
bubble-exhausting action of the valve when it starts to use. This
problem can be solved simply by replacing the needle with a larger
one. The tapered angled needle generates the least back pressure
and provides the smoothest fluid flow. The air in the liquid will
drip after the valve is closed. It is best to remove the air in the
liquid in advance, or use a glue that is not easy to contain air
bubbles. Or use the glue after centrifuging and defoaming.
Application Rang: PVC/Silicon logo, Trademark for garment, footwear outsole/Strap/Vamp, Shoe welting, Cup pad, Silicon keyboard cover, Non-slip mat, Refrigerator Sticker, Disney soft toy, Silicon Key Chain, PVC Zipper puller etc....
Technical parameters:
Model No. | FLD-24C |
Machine Size | 1250*1050*1560mm |
Weight | 420KG |
Electric Heating Power | 1.6KW |
Effective Trip | 850*480*80mm |
Worktable Size | 890*460mm |