Product Details
5083 Aluminum Alloy Plate Exfoliation Corrosion Resistance IRIS
Approval
Typical alloy: 5754,5083,5182,5086,5383 ,5059 ,5052,5454
Products detail of aluminium alloy sheet grade 5083:
- Can provide aluminium alloy plate 5083
- Can provide aluminium plate 5083 h321
- Can provide aluminium plate 5083 h111
- Can provide aluminium plate / sheet grade 5083
- Can provide aluminium plate alloy 5083 0/h111
- Can provide aluminium plate 5083 h116
- Can provide marine aluminium plate 5083
- Aluminium alloy sheet grade 5083 ALMg4.5Mn0.7 A5083 NT8
Application of aluminium alloy sheet grade 5083:
- Temper O is used for sealing head, wave board.
- Temper H32 and H111 be used for tank body
Aluminium tank in petrol transportation.
5083-H321 suitable for liquefied natural gas transportation
Aluminium tooling plate 5083
Product character for aluminium alloy sheet grade 5083:
- 1>. The elongation is higher than the standard
requirements,Improve safety factor of tanker.
- 2 >. High strength, excellent machining performance, corrosion
resistance, exfoliation corrosion resistance
- 3>. Inter-crystalline corrosion resistance, recyclable.
Products introduction for 5083 aluminium plate:
- Due to the oxidation film formed on the surface of aluminium
products, aluminium tanks can be directly used to transport various
liquid and liquefied gases without any inner protective coating,
and the purity of oil can be guaranteed because there is no
corrosion occurs within the tanks. Furthermore, there is few static
electricity generate on aluminium tanks due to their excellent
electrical conductivity, therefore the risk of explosion induced by
spark can be eliminated.
- Additionally, aluminium tanks have large capability to absorb the
transient energy generated during impact, and therefore prevent the
tank from cracking, and leaking. In the meantime, by using
aluminium tanks, the gravity centre of the trucks can be lowered,
and hence decrease the risk of rollover. This is also the reason
for BP and SHELL to use aluminium tanks in petrol transportation.
Aluminium alloy plate 5083 Chemical Composition
Cu | Mg | Mn | Fe | Si | Zn | Ti | Cr | Other | Aluminum |
0.1 | 4.0~4.9 | 0.40~1.0 | 0.4 | 0.4 | 0.25 | 0.15 | 0.05~0.25 | 0.15 | Remainder |
Aluminium 5083 datasheet & Mechanical Properties
Alloy | Temper | Yield Strength (Rm/Mpa) | Tensile Strength Rm(Mpa) | Elongation (%)
| Bend Performance (180) | Standard |
5083 | O | Min.145 | 290 ~ 370 | Min.17 | 1.5t 4t | EN14286-2007 |
5083 | H111 | 124 ~ 200 | 276 ~351 | Min.16 | | ASME SB209 |
5083 aluminium sheet sizes/5083 aluminium plate specification
Alloy Series | TypIcial Alloy | Typcial Tempe | Thickness (MM) | Width (MM) | Length (MM) |
5×××
| 5454,5754,5083,5182,5086, 5383,5059 | O,H111 | 5~8 | 1500~2500 | 2000-2400
|
Company Profile
Wuxi Jianbang Haoda Steel Co., Ltd. is an emerging company selling
aluminum and copper products at home and abroad.
We mainly supply aluminum plate, aluminum coil, aluminum rod,
aluminum tube, aluminum checkered plate, Corrugated aluminum plate,
copper plate, copper coil, copper pipe and copper bar .
Our products are strictly produced in accordance with national
standard GB,ASTM,EN , JIS and etc.
“Customers Satisfaction” is our consistent commitment, with
professional technical and service team , we provide customers with
timely, professional and point-to-point after-sales service.