C18 engine overhaul rebuild kit for caterpillar genuine parts

C18 engine overhaul rebuild kit for caterpillar genuine parts

product description

introduce

C18 Engine
Installation
Installation environment preparation: The C18 engine is large and heavy. Before installation, ensure that the installation site is spacious, flat and equipped with lifting equipment to facilitate the lifting and installation of the engine. At the same time, ensure that the installation area is clean, free of debris and dust to prevent impurities from entering the engine during installation.
Foundation installation: First, install the engine support base to ensure that the base is firm and the levelness meets the requirements to reduce the vibration of the engine during operation. Use special bolts and nuts to fix the base on the pre-prepared foundation and tighten it according to the specified torque.
Engine lifting and docking: Use the lifting equipment to lift the C18 engine steadily and move it slowly to the installation position so that the engine's mounting holes are aligned with the bolt holes on the base. During the docking process, be careful to avoid collisions between the engine and surrounding objects.
Pipeline and line connection: After the engine is in place, connect various pipelines, such as fuel pipes, cooling water pipes, exhaust pipes, etc. Ensure that the pipelines are tightly connected and there is no risk of leakage. At the same time, the electrical circuits connected to the engine, including sensor circuits, starter circuits, charging circuits, etc., should be connected according to the correct circuit diagram to avoid engine failure caused by wrong connection.
Debugging and inspection: After installation, fully debug the engine to check whether the installation of each component is firm and whether the pipes and lines are connected correctly. Start the engine and check the engine's operating status, including whether the parameters such as speed, oil pressure, and water temperature are normal.
Introduction to engine power
The common rated power of the C18 engine is around 441-597kW (600-800 horsepower). The specific power will vary depending on the specific model, adjustment and application scenario of the engine. For example, the power output of the C18 engine used in the generator set may focus on continuous and stable power supply; while the C18 engine used in heavy engineering machinery such as large mining trucks may be optimized in terms of torque output to meet the power requirements of the vehicle under heavy load, climbing and other working conditions.
Applicable models
Heavy-duty trucks: For some heavy-duty tractors that transport goods over long distances and with heavy loads, the C18 engine can easily cope with the long-distance travel needs of fully loaded goods with its powerful power output and good torque characteristics, ensuring that the vehicle can maintain a stable operating speed under different road conditions such as highways and mountainous areas.
Large-scale construction machinery: For example, large excavators, loaders, bulldozers, etc. In scenarios such as mining and large-scale construction projects, these equipment require powerful power to drive the working device for high-intensity operations such as excavation, loading, and bulldozing. The high power and high torque of the C18 engine can meet the working needs of these equipment.
Generators: C18 engines are often used in large mobile or fixed generators to provide reliable power supply for remote areas, construction sites, emergency power supply and other scenarios. Its stable power output can ensure the continuous and efficient operation of the generator set.
DAILY REFINING brand
It is difficult to obtain detailed information about the "DAILY REFINING" brand in the current public information. It is speculated that it may be a brand that focuses on the field of diesel engine parts, and may have its own characteristics in daily fine processing of products and quality control. Judging from the fact that the company operates many engine brand parts, DAILY REFINING brand products may be suitable for multiple brands of engines to meet the needs of different customers for the versatility and quality of parts.
Company Business
Operating Parts: The company operates a wide variety of diesel engine parts, covering the key components of engine operation.
Cylinder liner: As an important part of the engine, it provides precise guidance and sealing space for the movement of the piston. The cylinder liners of engines of different brands may differ in size, material and process. The cylinder liners provided by the company must meet the adaptation requirements of engines of various brands.
Piston and piston ring: The piston is subjected to high temperature and high pressure in the engine combustion chamber, converting the energy generated by combustion into mechanical energy; the piston ring plays the role of sealing, oil control and heat conduction. The pistons and piston rings provided by the company must have good high temperature resistance and wear resistance.
Valve, seat ring, guide: The valve is responsible for controlling the engine intake and exhaust, the seat ring cooperates with the valve to ensure sealing, and the guide ensures the accuracy of the valve movement. These parts must have high hardness and wear resistance.
Bearings: Main bearings, connecting rod bearings and thrust bearings, which play a role in reducing friction, supporting and positioning shafts during engine operation, and have extremely high requirements for materials and processing accuracy.
Pumps: The oil pump is responsible for providing lubricating oil to various engine components, and the water pump ensures the normal operation of the engine's cooling system. Both are essential for the reliable operation of the engine.
Main engine components: such as cylinder block, cylinder head, crankshaft, connecting rod, camshaft, etc. These components are the core structure of the engine and play a decisive role in the performance and reliability of the engine. Such components provided by the company must strictly comply with the technical standards of various brands of engines.
Operating engine brands: The company operates many engine brands, covering almost all the world's well-known diesel engine manufacturers. This enables the company to meet the needs of different customer groups. Whether it is engaged in construction machinery, transportation industry or industrial equipment maintenance, customers can find parts suitable for their equipment engines in the company. For example, brands such as Caterpillar and Cummins are widely used in the fields of construction machinery and heavy trucks; while brands such as Kubota and Yanmar are more common in small agricultural machinery and some light equipment.
Future development of Guangzhou Tengsong Engineering Testing Equipment Co., Ltd.
Technological innovation level
Intelligent testing equipment research and development: With the development of Industry 4.0 and intelligent manufacturing, the company may increase its investment in the research and development of intelligent testing equipment in the future. For example, developing testing equipment with automatic diagnosis, data analysis and remote monitoring functions, so that customers can grasp the equipment operation status and test results in real time, and improve the efficiency and accuracy of testing.
Non-destructive testing technology upgrade: In the field of non-destructive testing, we continue to explore new technologies and methods, such as the use of more advanced ultrasonic, ray, magnetic powder and other non-destructive testing technologies to meet the higher requirements for internal defect detection of engine parts and ensure product quality.
Market expansion level
International market development: With its accumulated technical and resource advantages in engine parts management, it actively expands the international market. Especially under the promotion of the "Belt and Road" initiative, it will strengthen business cooperation with countries and regions along the route, promote products and services to the global market, and increase the company's international reputation and market share.
Emerging field penetration: With the development of emerging industries such as new energy vehicles and electric engineering machinery, although the company currently focuses on diesel engine-related businesses, it may gradually penetrate into the testing equipment market in these emerging fields in the future, and lay out related technology research and development and product planning in advance.
Service improvement level
Customized service: Provide customized testing solutions and equipment according to the needs of different customers. For example, design special testing processes and equipment for the specific testing needs of large-scale construction machinery companies to meet the personalized quality control requirements of customers.
After-sales service optimization: Establish a more complete after-sales service system, including a fast-response technical support team, sufficient spare parts reserves, and regular equipment maintenance training, etc., to improve customer satisfaction and loyalty.
Introduction to high-quality product parts
Excellent materials: The engine parts provided by the company are made of high-quality raw materials. For example, the piston may be made of high-strength aluminum alloy material. After a special heat treatment process, it has good high temperature resistance and wear resistance, while reducing its own weight and improving the fuel economy of the engine.
Advanced manufacturing process: Taking the crankshaft as an example, high-precision processing equipment and advanced manufacturing processes, such as CNC machine tool processing and surface quenching treatment, are used to ensure that the dimensional accuracy, surface finish and hardness of the crankshaft meet high standards, thereby improving the reliability and service life of the engine.
Strict quality inspection: During the production process of parts, multiple quality inspection processes are implemented. From raw material inspection, semi-finished product inspection to comprehensive inspection before the finished product leaves the factory, we use advanced inspection equipment and methods, such as three-coordinate measuring machines, non-destructive testing equipment, etc., to ensure that every part meets relevant standards and customer requirements.
Rebuilding and overhaul kit price
The price of rebuilding and overhaul kits varies from $180 - $300 - $900 - $1500 depending on the model. This price difference is mainly due to the different types and quantities of parts contained in engine kits of different models, as well as the complexity and material requirements of the parts. For example, the price of rebuilding and overhaul kits for some small engines may be in a lower range due to the relatively small number of parts required and the simple structure; while the price of rebuilding and overhaul kits for large, high-performance engines will be higher due to the inclusion of more high-precision and complex parts.
Product application scope
The company's products are suitable for construction machinery, repair shops, retail stores and mechanics. For the construction machinery industry, the products can meet the repair and maintenance needs of various types of construction equipment engines to ensure the normal operation of the equipment; repair shops can purchase these products to provide engine repair services for customers; retail stores can sell the products to end users; mechanics can also use these parts to repair and maintain engines in their daily work..

Company Profile

广州腾松工程机械设备有限公司，专业柴油发动机配件，18年行业经验，专注于工程机械、农业、发电机组、船舶、挖掘机、装载机、推土机、平地机、起重机、卡车、叉车等DAILY REFINING品牌机械发动机配件。我们与欧洲、美洲、中东和东南亚地区合作，并在50多个国家建立了业务关系。

DAILY REFINING品牌：品质与创新的发动机零部件品牌

DAILY REFINING 是一个致力于提供高品质创新型发动机零部件的品牌。通过持续的研发和严格的质量控制，DAILY REFINING 为全球汽车和机械行业提供高品质的发动机零部件解决方案。本文将介绍 DAILY REFINING 品牌在发动机零部件领域的核心价值、技术实力及其卓越地位。

DAILY REFINING 的品牌核心价值体现于其对品质和可靠性的承诺。他们注重产品性能、耐用性和安全性，并致力于为客户提供卓越的发动机零部件。品牌价值观包括卓越的品质、领先的创新能力和客户满意度，这些价值观贯穿于 DAILY REFINING 的产品和服务之中。

日精拥有专业的研发团队和先进的生产设备，奠定了坚实的技术实力基础。他们持续投入研发，并与行业领先的合作伙伴携手，不断推动发动机零部件技术的创新。日精的发动机零部件经过严格的测试和质量控制，确保其在各种工况下的可靠性和卓越性能。

DAILY REFINING 的发动机零部件产品线广泛覆盖船舶、工业机械等多个应用领域。我们提供活塞、曲轴、缸套、缸盖等各种类型的零部件，以满足不同发动机的需求。无论是传统的燃油发动机还是先进的电动汽车发动机，DAILY REFINING 都致力于提供高质量、高性能的发动机零部件。

DAILY REFINING对产品质量有着严格的把控和保障。他们采用先进的生产工艺和质量管理体系，确保每一个发动机部件都符合高标准。DAILY REFINING的零部件经过长期的实验和验证，即使在严苛的工作环境下也能保持稳定可靠的性能。

作为一家专注于品质与创新的发动机零部件品牌，DAILY REFINING凭借卓越的技术实力和不懈的努力，在业界树立了良好的口碑。他们提供多样化的发动机零部件解决方案，为全球汽车和机械行业的发展做出了重要贡献。未来，我们期待DAILY REFINING继续引领发动机零部件领域的创新，为客户提供更可靠、更高性能的发动机零部件，推动整个行业的发展。