Hcl Acid Regeneration Plant Manufacturers 8m3/H Energy Electricity

Excellent acid regeneration plant 8m3/h (energy electricity) for customer

Waste acid regenerating unit can be decomposited by wasteacid regeneration production line to obtain the regenerated hydrochloric acid andiron oxide powder with the same concentration as the original waste acidsolution not containing or containing a small amount of molysite. Regeneration acidafter concentration adjustment by complex acid could be used again by the acid picklingline.

Production Technology Introduction

Waste acid regenerating principle

4FeCL₂+4H₂O+O₂=2Fe₂O₃+8HCL

2FeCL₃+3H₂O=Fe₂O₃+6HCL

Process Flow:

Waste acid → waste acid storage tank → concentration → spray roasting →decomposition → HCL (gas) → iron powder (collecting) → furnace gas cooling →HCL absorption → regenerated acid → regenerated acid storage tank

Iron oxide powder is stored in the iron powder bin forpackaging storage by air conveying device; Offgas after absorption is emittedthough many times washing.

Performance of the Acid Regeneration Line

Capacity: 3m³/h, 4m³/h, 6m³/h,8m³/h. Capacity can be designed according to client requirement.

Major Parameters

Waste acid Fe₂+≤140g/L HCL 3-5%

Regenerating acid Fe₂+ ≤5g/L HCL 190-220g/L

Iron powder Fe₂O₃≥99% CL-≤0.01%

Exhaust gas Fe₂O₃≤10mg/Nm³ HCL ≤20mg/Nm³

Effluent Fe₂+0-120g/L HCL 0-20% (discontinuously discharge)

Efficiency ≥99.5%

Energy consumption <750Kcal/L

Energy electricity, water, compressed air

Characteristics of the Acid Regeneration Line

Our waste acid regenerating unit could connect with the acid pickling lineseamlessly as we have taken into consideration of plant planning productionline design to commissioning, production and maintenance together. By our AcidRegeneration Line, the resource configuration optimization is realized, theuser cost is reduced, the operation is simplified, the efficiency is improved, andthe stable and safe operation of the line is guaranteed.

With the society environmental protection consciousness is strengthened, nowadaysmore requirements are raised for waste acid treatment. Our company waste acidregenerating unit adopts the advanced spray roasting method (i.e.: Ruthnermethod), so that the hydrochloric acid recovery efficiency is higher, "TheThree Wastes" emissions are less. Not only the problem of environmentalprotection is solved, but also very good social benefits and economic benefitsare honored.

Acid pickling unit design parameters

Beijing JJRS Technology Development Co.,Ltd. registered in national high-tech park - Beijing Economic and Technological Development Zone, is a high-tech enterprise specialized in a complete set of metallurgical equipments for metal surface coating and steel strip intensive processing, its technology integrates machinery, optics, electricity and hydraulic pressure together.

JJRS is professional on turn-key projects from general planning, designing to manufacturing, installing, commissioning and service. Besides, its business also covers the designing, manufacturing of single equipment, and automatic control system of engineering projects.

JJRS has passed ISO9001 quality management system certification, ISO14000 enviromental management system certification and GB/T28001 occupational health safety management system certification.

JJRS is committed to technology innovation and continuous process improvement of the metallurgical equipment, has achieved a number of scientific research achievements in energy conservation, waste recycling, etc. JJRS has obtained numbers of national patents and won a good reputation from customers both in China and abroad.

Bearing philosophy of advanced technology, professional team, customers first and perfect service in mind, JJRS gathers excellent technology research team and highly qulified management personnel together, the company has perfect management systerm, powerful engineering design and complete project capability by virtue of exquisite technology and scientific management.