UN 38.3 Sine Shock Control Vibration 51mm Test System 5～3500Hz
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN553
Minimum Order Quantity:1
Delivery Time:30 Days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
UN 38.3 Sine Shock Control Vibration 51mm Test System 5～3500Hz
Complied Standards & Clauses
This vibration system is required by UN 38.3 clause 4.3 test T.3, IEC 62133-1:2017 clause 7.2.2, IEC 62133-2:2017 clause 7.3.8.1, etc.
Product Overview
Vibration testing is the act of exciting or shocking a component or device to see how it would react in a real environment. The application range of vibration test is extremely wide, from industrial products such as circuit boards, aircraft, ships, rockets, missiles, automobiles and household appliances.
Technical Parameters
| Vibration generator | DC-600 | DC-2000 |
| Sine Force | 600kgf (6000N) | 2000kgf (20000N) |
| Random Force | 600kgf (6000N) | 2000kgf (20000N) |
| Impact Force | 1200kgf (12000N) | 4000kgf (40000N) |
| Frequency Range | 5～3500Hz | 5～3500Hz |
| Continuous Displacement | 51mm | 51mm |
| Vibration Isolation Frequency | 3Hz | 2.5Hz |
| Level One Resonant Frequency | 3300±5%Hz | 2600±5%Hz |
| Countertop Screw | 17*M8 | 17*M10 |
| Magnetic Flux Leakage | <1MT | <1MT |
| Maximum Speed | 2m/s | 2m/s |
| Maximum Acceleration | 750m/s2 (75g) | 980m/s2 (100g) |
| Equivalent Mass of Moving Parts | 8kg | 20kg |
| Dynamic Coil Diameter | Φ230mm | Φ280mm |
| Max. Loading | 300Kg | 300Kg |
| Weight | 590kg | 2695kg |
| Switching Power Amplifier | (KA-5) | KA-21 |
| Amplifier Output | 5KVA | 21KVA |
| Rated Output Voltage | 120Vrms | 120Vrms |
| Signal to Noise Ratio | >65dB | >65dB |
| Power Amplifier Efficiency | ＞95% | ＞95% |
| System Protection | Temperature protection, over-displacement protection, over-voltage protection, over-current protection, under-voltage protection, external protection, logic fault protection | Temperature protection, over-displacement protection, over-voltage protection, over-current protection, under-voltage protection, external protection, logic fault protection |
| Dimensions | 1800*900*800mm | 1800*900*800mm |
| Weight | 240kg | 450kg |
Details
Vibration machine selection formula and vibration generator structure diagram
1. The test conditions provided by customer’s company;
2. Test type: Sine sweep; Random
3. Frequency response range: 2-5000Hz
4. Formula: A(g)=(2πf)2Dcm/980≒A=0.002DmmF2
D=A/0.002F2
F=M(kg) ×A(g)
Vibration Table Body Configuration
1. Moving coil
The vibrating table is equipped with cast and manually machined moving coils, optoelectronic load support system and dual bearing axial guidance. Dual bearing guidance is a unique feature that helps reduce dynamic axial crossing and rotation during vibration testing for superior durability.
2. Excitation coil
Double magnetic circuit structure, low flux leakage, uniform magnetic field.
3. body surface
Using advanced phosphating treatment and car paint technology, it has long-term anti-wear and anti-rust effects.
4. Table refrigeration:
Adopt low-noise fans and improve the air intake structure of the table body. The excitation coil adopts a honeycomb air duct, and the middle magnetic ring adopts a double-layer shunt air duct. A new air duct design is adopted to enhance the cooling effect.
UN 38.3 Sine Shock Control Vibration 51mm Test System 5～3500Hz
Inquiry Cart
0