VW80000 Ice Water Splash Test Equipment For Automotive Parts
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN4421
Minimum Order Quantity:1
Delivery Time:30 days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
VW80000 Ice Water Splash Test Equipment For Automotive Parts
System Information
This test equipment is designed and manufactured according to ISO 16750-4:2010 clause 5.4 and VW80000: 2009-10, etc.
It simulates the thermal shock test caused by ice water for products used in shallow water areas of vehicles components. The purpose is to simulate icy water splashing onto heating systems or components when driving on wet roads in winter. The failure mode is either mechanical cracking of the material or seal failure due to a different temperature expansion coefficient.
Working principle:
Heat the DUT (device under test) to a certain temperature and a specified time in the test chamber. Then spray the DUT with ice water for 3s. If the DUT is only splashed in one direction on the vehicle, spray water only in this direction of the installation location. If the equipment is exposed to water splashing in multiple directions on the vehicle, these directions shall be stated and a new DUT shall be tested in each direction. The width of the splash is controlled to always be greater than the width of the DUT.
Technical Parameters
1. Dimensions and sample prohibition | |
| Upper inner box size | 1200X900X700 mm (W*D*H) |
| Basket size | Approx. 840X680X650mm (W*D*H) |
| Outer Dimensions | Approx 1800X1520X2150mm (W*D*H) |
| Sample prohibition | It is forbidden to test and store samples of flammable, explosive and volatile substances Testing and storage of samples of corrosive substances is prohibited Prohibition of testing or storage of biological samples It is forbidden to test and store samples of strong electromagnetic emission sources |
| 2. Technical indicators | |
| Temperature range of high temperature box | RT+10℃～150℃ |
| Temperature deviation | ≤2℃ |
| Temperature uniformity | ≤2℃ (under no-load condition) |
| Test water temperature | 0℃~+4℃ |
| Test water temperature control | 5P chiller (with pure titanium evaporator) |
| Number of test cycles | 0~100 times, can be preset |
| Basket load | 100kg (Automatically controllable lifting) |
| Ice water splash nozzle pattern | The nozzle and pressure calibration system are manufactured in strict accordance with the following figure and etc., SUS316 stainless steel, detachable. The display outside the box can control the nozzle flow and other functions |
| Water spray diagram | |
| Ice Water Splash Nozzle quantity | 1PC |
| Water jet flow | 3L-4L per splash/nozzle |
| Spray duration | 3s |
| Test cycles | 0~100 times can be preset |
| Distance of nozzle to DUT | 325±25mm (300~350mm) |
| Test liquid | Deionized water or +5%NaCl+3% Arizona fine dust |
| Test liquid | Recyclable |
| Switching time | ≤20s |
| Automatic cleaning function | After the test is completed, the pipeline and the sample are automatically cleaned |
| Other requirements | Self-contained drainage system, automatic protection system for lifting and lowering of the basket, and anti-clogging technology for nozzles |
| 3. Structural characteristics | |
| Box material | Adopt two-box hanging basket type box, the upper part is heating zone, the lower part is water splashing zone, and the bottom is water tank (water can be recycled); A. Outer box material: steel plate with plastic spray B. Inner tank: stainless steel is used for the whole inner box and the basket |
| Box door | Double doors, the door size is 1200 x 700mm (width x height), and there is a glass window on the left and right. Multi-layer vacuum tempered glass, there are lights in the box, and the observation window does not reflect light. |
| Insulation | Filled with polyurethane foam + glass fiber to ensure thermal insulation performance, about 100mm thick |
| Test hole | 100mm diameter with silicone stopper |
| Circulatory system | Circulating fan, stainless steel impeller; |
| Heating system | Heater: Nichrome electric heater Control mode: non-contact equal period pulse width modulation, SSR (solid state relay) |
Test water | Adopt 5P chiller (with pure titanium evaporator) to supply ice water |
| Freeze-free design | No icing phenomenon |
| Control panel | Controller, operation button |
| Movable casters | Casters: 4 Foot support: 4 fixed foot support |
| Control System | Thermostat: 7-inch color touch screen controller Operation mode: The test conditions can be programmed arbitrarily within the scope of the test capability Control accuracy: 0.1℃ Control mode: P.I.D automatic control Temperature measurement: platinum resistance PT100 |
| Controller | 7" true color touch screen controller: The touch screen can control the temperature in the box, the temperature of the water tank, the flow rate, the water pump and the test time, etc.; the flow rate and temperature are directly displayed on the touch screen, and the automatic constant current and constant temperature are used. |
| Setting method | English menu, touch screen input |
| Operation mode | Periodic operation, continuous operation |
| Program settings | The test program name and program parameters can be customized, and the program storage and import are supported. |
| Display function | Real-time dynamic refresh sampling data and setting parameters, real-time curve refresh function. Can display pressure, flow, temperature, test time, etc. |
| Testing time | 0-999min (touch screen control), there are corresponding standard time options for different waterproof requirements. |
| Testing frequency | 1-999 times (touch screen control) |
| Alarm function | Alarm automatic shutdown, alarm record viewing and exporting, alarm setting and fault analysis functions |
| Record function | The sampling time is 10s, and the curve and experimental data within three months can be recorded. The sampling data at each moment within three months can be inquired in detail. It can be exported by USB2.0, printed and recorded on the PC, and the data report can be generated. |
| 4. Security system | |
| Emergency stop | The equipment is equipped with a fault alarm buzzer, and an emergency stop button is set on the control panel. If the equipment fails to stop, the emergency stop button can be used to stop |
| Test box | Adjustable over-temperature protection; temperature fuse in test space; limit over-temperature protection of air-conditioning channel; fan motor overheating protection |
| Other | Main power phase sequence and phase loss protection; leakage protection; overload and short circuit protection The main power switch has leakage protection function; Equipped with waterway safety protection device; water shortage alarm. |
| 5. Conditions of use (the user guarantees that the following conditions are met) | |
| Installation site | The ground is flat and well ventilated; There is no strong vibration around the device; There is no strong electromagnetic field around the device; There are no flammable, explosive, corrosive substances and dust around the equipment; Appropriate space for use and maintenance is reserved around the equipment, see the manual for details |
| Environmental conditions | Temperature: 5℃～35℃ Relative humidity: ≤85% Air pressure: 86kPa～106kPa |
Power supply conditions power supply | AC380V three-phase five-wire Voltage allowable fluctuation range: AC (380 ± 38) V |
Battery capacity Maximum current | Frequency allowable fluctuation range: (50±0.5)Hz The grounding resistance of the protective ground wire is less than 4Ω The user is required to configure the air or power switch of the corresponding capacity for the equipment at the installation site, and And this switch must be used independently for this device |
VW80000 Ice Water Splash Test Equipment For Automotive Parts
Inquiry Cart
0