Fluorescent Ultraviolet Aging Chamber Lamp Exposure Weathering Accelerated ISO 4892
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN882B
Minimum Order Quantity:1
Delivery Time:30 days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
Chamber Type Fluorescent Ultraviolet Lamp UV Aging Test Chamber
Complied Standards & Clauses
The UV Weathering Accelerated Ageing Test Chamber is designed and manufactured according ton the standard requirements of ASTM G 154, ISO 4892-2, ISO 4892-3; ISO 11507; ASTMD 4329, and etc.
Equipment Overview
The UV Weatherproof Test Chamber can simulate the hazards caused by
sunlight, rain, and dew. Adopt fluorescent UV lamps to simulate the
effect of sunlight, use condensed moisture to simulate rain and
dew, and place the tested material at a certain temperature to
alternate between light and moisture test in the loop program. The
test chamber takes few days or few months, which can reproduce
hazards that occur outdoors. Hazard types include: fading,
discoloration, loss of gloss, chalking, cracking, turbidity,
bubbles, embrittlement, strength loss, and oxidation. The UV test
data can help to select new materials and evaluate how changes in
formulation affect the durability of new products. It is applicable
widely in coatings, inks, paints, resins, plastics, rubber,
printing and packaging, aluminum profiles, adhesives, automobiles,
motorcycle industries, cosmetics, metals, electronics,
electroplating, medicine, etc.
Technical Parameters
| Inner chamber size | 1100*620*500 mm(W×D×H) |
| Outer chamber size | Approx. 1500*780*1800mm(W×D×H) |
| Irradiation temperature | 50～ 70℃ |
| Condensing temperature | RT~60℃ |
| Spray temperature | Room temperature |
| Temperature uniformity | ±2℃ |
| Temperature fluctuation | ±1℃ |
| Temperature resolution | 0.01℃ |
| Relative humidity | Condensation period≥85%RH; Irradiation period≤75%RH |
| Lamp wavelength | UVA-340, band 315-400nm, irradiance 0~0.9W/m2 Or UV-B 313, band 280--315nm, irradiance 0~0.9W/cm2 |
| Quantity of lamps | 8 PCS |
| Lamp power | 40W/PC |
| Lamp brand | Q-lab |
| Lamp lifespan | Around 1600 hours |
| Distance between sample and lamp | 100～300mm can be adjustable, according to standard requirements, the distance should be 50mm. |
| Lamp Central distance | 70mm |
| Lamp spacing distance | 35mm |
| Number of spray nozzle | 4 pcs stainless steel nozzle ararnged in the top low |
| Water spray pressure | 70～200Kpa adjustable |
| Test time | 1～9999 H, M, S, the time can be preset |
| Control system | Independent research and development of touch screen and PLC controller |
| Inner chamber material | SUS304 stainless steel plate |
| Outer chamber material | Painted A3 plate |
| Radiometer/Sun Eye | 1. Model: TEMI-UVI 2. Detection wavelength range: 200nm ~ 480nm. 3. Irradiance measurement range: 0.4W/m2～1.6W/m2 4. Operating temperature range: normal temperature---70 degrees 5. Photosensitive area: Φ12mm 6. Appearance size: 30*30*35mm 7. The illuminance sensor can measure and control the radiation energy in real time and feed it back to the controller. The controller adjusts the PID control in real time according to the set value to ensure that the set value and the actual value are consistent. |
| Equipment use conditions | Please install the water pipe in advance, and use the 1/2-inch pipe interface; the floor drain or drain pipe interface should be reserved for the placement of the equipment. The drain pipe interface is level with the ground. |
UV-A lamp irradiance distribution map
UV-B lamp irradiance distribution map
Fluorescent Ultraviolet Aging Chamber Lamp Exposure Weathering Accelerated ISO 4892
Inquiry Cart
0