IEC 62196 Jointed Test Finger EV Connector Testing Equipment
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN2210-2
Minimum Order Quantity:1
Delivery Time:5 days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test
Complied Standards & Clauses
IEC 62196-1Ed.4CDV 2020 clause 10.1.
Equipment Overview
This is a precision test finger made in accordance with many
standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is
intended to verify the basic protection against access to hazardous
parts. It is also used to verify the protection against access with
a finger. This test finger probe consists of dito, finger, base and
insulated handle which simulates the characteristics of the human
hand. It has two movable joints, which can be curved at 90°.
Customizable: it can be used for anti-electric shock test when
equipped with an alligator clip at the end of the handle, or used
for enclosure protection test when open threaded hole of M6 at the
end of the handle (connected with pull and push dynamometer).
Technical Parameters
| Model | SN2210-2 |
| Name | Test Probe B |
| Joint 1 | 30±0.2 mm |
| Joint 2 | 60±0.2 mm |
| Finger length | 80±0.2 mm |
| Fingertip to baffle | 180±0.2 mm |
| Cylindrical | R2±0.05 mm |
| Spherical | R4±0.05 mm |
| Fingertip cutting bevel angle | 37o 0 -10′ |
| Fingertip taper | 14 o 0 -10′ |
| Test finger diameter | Ф12 0 -0.05 |
| A-A Section diameter | Ф50 mm |
| A-A Section width | 20±0.2mm |
| Baffle diameter | Ф75±0.2 mm |
| Baffle thickness | 5±0.5 mm |
| Applied standard | IEC 61032, IEC60529-1, etc. |
Details:
IEC 62196 Jointed Test Finger EV Connector Testing Equipment
Inquiry Cart
0