Electric Vehicle Leakage Tracking Test Equipment IEC 62196 PLC Control System
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN774
Minimum Order Quantity:1
Delivery Time:30 days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
IEC 62196 Electric Vehicle Leakage Tracking Test Equipment
Complied Standards & Clauses
IEC 62196-1 Ed.4CDV 2020 clause 28.4, 29.6.
IEC60335-1 clause 29.2 and Annex N,
IEC 60065:2014 clause 13.4,
IEC60598-1,
IEC 60884-1:2013 clause 28.2,
UL746A
ASTM D3638-92
Equipment Overview
The tester is designed and manufactured according to the standard requirements of IEC60112, and required by IEC 62196-1Ed.4CDV 2020 clause 28.4, 29.6, IEC60335-1 clause 29.2 and Annex N, IEC 60065:2014 clause 13.4, IEC60598-1, IEC 60884-1:2013 clause 28.2, UL746A and ASTM D3638-92 and etc. The working principle of the leakage tracking test (tracking index testing) is that the conducting liquid (0.1%NH 4 CL) of required volume in the required height (35mm) and required time (30s) drops with the voltage between the platinum electrodes (2mm × 5mm ) on the surface of solid insulating material. Thus the users evaluate the tracking resistance performance of solid insulating material surface under the combined influence of electric field and humid or contaminate medium. In a word, this device is used to measure the compare tracking index (CT1) and electrical resistance index (PT1).
A gauge block is supplied with the instrument to ensure the electrodes have the proper distance between them. The table height is easily adjustable to ensure the proper angle of the electrodes and height of drops. The rest of the test is controlled from outside the test chamber with the door closed. The voltage, limiting current, drip rate and number of drips are all set on the control panel. An operator should observe the test to see if a flame ignites. The instrument sounds an alarm if there is a tracking failure of at least two seconds.
The leakage tracking tester adopts to advanced PLC control system and 7” color touch screen, it is suitable for the research, production and quality department of lighting equipment, low-voltage apparatus, household appliance, machine tool electric appliance, electrical machine, electric tool, electronic instrument, electrotechnical instrument, information technology equipment. It is also suitable for the industry of insulating material, engineering plastics, electrical connector and accessories.
Technical Parameters
| Parameter model | SN774 (0.5m³) |
| Working voltage | 220V/50Hz,1KVA |
| Control | Advanced PLC |
| Display | 7 inch color touch screen |
| Testing voltage | 0～600V adjustable, precision 1.5％ |
| Timing device | 9999X0.1S |
| Electrode | Platinum electrode and brass electrode each for a pair |
| Electrode dimension | (5±0.1)×(2±0.1)×(≥12), 30°slant |
| Electrode included angle and distance | 60°±5°, distance is (4±0.1㎜) |
| Electrode pressure | 1.00N±0.05N(digital display is optional) |
| The interval of dropping liquid | 30±5S, adjustable |
| Dropping liquid height | 35±5mm |
| Dropping liquid delay | 0.2S(solenoid valve opening time) |
| Dropping liquid size | 45～50 drip/cm3 |
| Time-delay circuit | 2±0.1S(in 0.5A or larger current) |
| Short-circuit pressure drop | 8% MAX |
| Short-circuit current | 1±0.1A 1％ |
| Wind speed | 0.2m/s |
| Environmental requirement | 0～40℃, relative humidity≤80%, in the place of no obvious vibration and corrosive gas |
| Equipment size & weight | 1100mm* 550mm* 1100mm, 180KGS |
| conforms to standard | IEC60112, IEC 60598-1, IEC60695, IEC 60884-1, UL746A, ASTMD3638, etc. |
Details:
Electric Vehicle Leakage Tracking Test Equipment IEC 62196 PLC Control System
Inquiry Cart
0