Product Details
20 Ton Double Girder RTG Rubber Tyred Container Gantry Crane For
Port
Introduction:
Rubber Tyre Gantry Cranes(RTG) are special equipments to remove,
load and unload international standard containers. Running and
moving in the yard, it has the advantage of high production
efficiency and fine maneuverability, also the small sensibility to
unevenness of the ground. RTG has tractor trolley and standard
trolley two models. RTG is powered by cable drum. At the same time,
diesel generating set is equipped for conditions when the power is
off or the crane moves to another yard.
Technical Parameter:
| | |
Capacity(under spreader) (t) | | |
| | |
| | |
| | |
Stack Layers/Passing Layers | | |
| | |
| | |
| | |
Cross Travel Speed (m/min) | | |
Long Travel Speed (m/min) | Full Load-90,Without Load-130 | Full Load-20,Without Load-40 |
| | |
| | |
| Electric, Diesel engine, Electric-Diesel drive |
Rubber tyre Container Crane Features:
- The power source is three-phase alternating current, rated
frequency is 50HZ, rated voltage is 380V.
- The working environment temperature ranges from -20℃ to +45℃ and
the relative humidity is no lower than 95%(with dew).
- In-service, the wind speed should be no higher than 20m/s;
out-of-service, the wind speed should be no higher than 44m/s.
- The gradient of crane traveling floor should be less than 1% and
part of that should be no more than 3%.
- The crane which has the special requirement for working conditions,
can be manufactured following the contracts.
Photo:
Company Profile
CATET Co.,Ltd is a technology-based manufacturing enterprise integrating
equipment research and development and intelligent manufacturing,
affiliated to Dongqi Group. The group's brands include: Dongqi
Crane, BTARO Crane, SZW, CATET. The company currently has more than
560 employees, including more than 80 management and technical
personnel. It has more than 500 sets of various production and
testing equipment, including 30 CNC machining centers, 1 Italian
COORD3 three-coordinate measurement center, and 10 laser and
cutting centers. The annual comprehensive production capacity is
more than 10,000 sets. The products are mainly exported to 96
countries and regions including Southeast Asia, Europe, and the
Middle East. The company has GJB9001C, IS09001, IS045001, ISO14001,
ISO50001, ISO10012, GBT29490, GBIT23001, GBIT23006 and other
standard certifications, and has obtained multiple certifications
such as EU CE certification. The company's main products include:
bridge cranes, gantry cranes, electric hoists, chain hoists, hooks,
wheel sets, motor reducers, cabs and other crane accessories, rail
transport vehicles, trackless transport vehicles, etc. The company
cooperates with well-known domestic and foreign companies such as
Schneider, SEW, ABM, ABB, Danfoss, SKF, etc. All parts and
structural parts are produced in strict accordance with technical
standards. The products are widely used in steel and electricity,
petrochemicals, machinery manufacturing, military industry,
warehousing and logistics, papermaking, steel manufacturing,
automobile manufacturing and other fields.