Add to Cart
Reverse Osmosis Water Purification Plant 500LPH Filtration System
Single Stage
Application fields of reverse osmosis:
(1) Power industry: boiler water supply, cooling DAMS;
(2) Electronics industry: semiconductor industry ultra-pure water,
integrated circuit cleaning water, formula water;
(3) Food industry: formula water, production water;
(4) Pharmaceutical industry: process water, preparation water,
washing water, water for injection, sterile water preparation;
(5) Beverage industry: formula water, production water, washing
water;
(6) Chemical industry: production water, waste water treatment;
(7) Drinking water engineering: ultra-pure water preparation,
drinking water purification;
(8) Petrochemical industry: oilfield injected water, petrochemical
wastewater advanced treatment;
(9) Seawater desalination: water used for production and living in
island areas, coastal water shortage areas, ships, seawater oil
fields, etc.;
(10) Environmental protection: recycling of precious metals and
water in electroplating rinsing water to achieve zero discharge or
micro-discharge.
Technical Specifications of RO Water Treatment System
500LPH Reverse Osmosis System | |
Model | JFRO-500L |
Host Size | 800x600x1600mm (can be customized) |
Power | 1.5KW |
Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
Operating Pressure | 0.8-1.2MPa |
Recovery Rate | 50% |
Designed Water Inlet | 1000L/h |
Outlet Flow | 500L/h |
Desalination Rate | ≥99.5% |
RO Frame | SUS304 |
Membrane Size | 4040 |
Membrane Elements | DOW /Hydranautics/Troy/ Vontron (Optional) |
Number of Membranes | 2 |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
Tank Material | SS/FRP (Optional) |
Control Valve | Manual/Automatic |
Control Valve Brand | FLECK/RUNXIN |
Membrane Housing | SS/FRP (Optional) |
Pipe Material | U-PVC, Stainless steel (Optional) |
Introduction to reverse osmosis technology:
RO (Reverse Osmosis) reverse osmosis technology is the use of
pressure gauge difference as the power of membrane separation and
filtration technology, from the United States in the 1960s
aerospace science and technology research, gradually transformed
into civil, has been widely used in scientific research, medicine,
food, beverage, seawater desalination and other fields. RO reverse
osmosis membrane aperture is as small as nanometer (1 nanometer
=10-9 meters), under a certain pressure, H2O molecules can pass
through the RO membrane, and the inorganic salts, heavy metal ions,
organic matter, colloids, bacteria, viruses and other impurities in
the source water can not pass through the RO membrane, so that the
pure water that can pass through and the concentrated water that
cannot be strictly separated. The conductivity of pure water
filtered by RO membrane is 5 s/cm, which meets the Level 3 water
standard of national laboratory. After the atom-level ion exchange
column cycle filtration, the effluent resistivity can reach
18.2M.cm, exceeding the national laboratory level 1 water standard
(GB682-92).
Process flow of RO Water Treatment System
Raw water → Raw water tank → Raw water pump → Multi-media filter
(quartz sand filter) → Activated carbon filter → Soft water
processor → Precision filter → High pressure pump → Primary reverse
osmosis (RO) device → Purified water tank → High pressure pump →
Two Stage reverse osmosis → ultraviolet sterilization device →
water point.
Photos of reverse osmosis water treatment system
FAQ:
1. What is the design water yield of ro membrane element? (except
anti-pollution membrane and seawater desalination membrane)
Model 4040 is designed by 0.25m3/h
Model 8040 is designed by 1-1.2m3/h
2. What is the material of mechanical filter?
Carbon steel, stainless steel, fiberglass
3.What are the multi-way control valves?
Manual control valve, automatic control valve
Multi - way control valve is divided into: filter valve and
softening valve
Automatic control valve is divided into: time type and flow type.
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean
source, etc.