Ductile Iron Flanged F6 Non Return Swing Check Valve (PN10 PN16)

Rubber flap swing check valve installation

(1) Compare the rated parameters required by the equipment with the rated parameters marked on the product to ensure that the required requirements are met;
(2) The installation personnel must be trained and experienced to ensure the smooth completion of the installation work;

(3) After the installation is completed, a thorough inspection is required to ensure that the installation is correct;

(4) In order to ensure that there are no accidents in the installation work, the piping system should be thoroughly cleaned before the product is installed (chemical reagents are used if necessary) to ensure that the piping system is clean, free of rust and dirt, and it needs to be removed before flushing. go to all filtration devices to make sure the pipes are clear;

(5) It is recommended to install a temporary pipeline at the equipment installation pipeline during the initial cleaning of the system, and then install the equipment on the pipeline after the flushing work is completed;

(6) Use standard flanges and fasteners to connect;

(7) When installing, please note that the flow direction of the medium must be consistent with the arrow direction of the valve body;

Application:

Reduced DIN Ball Valve

Product name :Reduced Port DIN Ball Valve

Product specification :2"~8"

End flange size :EN 1092-2/ISO7005-2

Nominal pressure :PN16

Stress test :Shell Test 3.1 mpa (by water )

Actuator mounting pad :NO

Main material :Cast Iron
Design and manufacture :EN12516/DIN3357

Major design standards :EN12516/DIN3357

Flange standard :DIN3202/EN558-1

Structural length :14/ F4

Inspection and test standard :EN1266 / ISO5208 /DIN3230

Material :

Related Standard:

Established in 2012, Fengbao Valve Manufacturing Co., Ltd. is an entity factory with professional production experience and professional manufacturing technology. The company is located in Cangzhou City, Hebei Province, with a production plant of 5,000 square meters and an office space of 3,000 square meters. The company has more than 200 employees, including more than 50 engineering and technical personnel, including 5 with senior professional titles and 30 with intermediate professional titles.
The main products of our company are: ball check valve, noise reduction check valve, soft sealing gate valve, multi-function water pump control valve, water conservancy control valve, groove gate valve, anti-fouling isolation valve, exhaust, sludge discharge valve, filter series valve products. The company adheres to the business philosophy of "customer first, quality-oriented, considerate service", integrates various professional and advantageous resources, and creates cost-effective products. The company has an excellent R&D team dedicated to creating trustworthy products. Seek new development and innovate brand.
The main features of the company's products are moderate price, high quality and high cost performance. The company's independent research and development, production, and unique production methods, in order to achieve first-class quality, are deeply favored by customers!