2 Compartment Oil Well Testing Equipment Gauge Tank 2x50bbl Atmospheric
Brand Name:JC Wellhead
Certification:ASME
Model Number:100bbl
Minimum Order Quantity:1 set
Delivery Time:30-45 days
Payment Terms:T/T, L/C, D/P
Contact Now
Add to Cart
Verified Supplier
Address:
No.25, Gaoxin 6th Road, Hi-tech zone, Xi'an, China
Supplier`s last login times:
within 37 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
API 6A Well Surface Testing Oil Diverter Manifold
The nonpressurized gauge tank is used to measure low flow rates or calibrate inferential or positive displacement meters. It has two compartments, one of which can be emptied by the transfer pump while the other compartment is being filled. Sight glasses with a scale permit calculation of the change in volume based on the physical dimensions of the gauge tank.
Safety features include flame arrestors on each vent of the gauge tank and a thief hatch in case the vessel is accidentally overpressurized. A grounding strap is attached to each gauge tank to prevent buildup of static charges.
The gauge tank is never used when H2S gas is present in the effluent because gas released from the gauge tank is vented to the atmosphere and may endanger personnel. Vent line Shearing roof Ins.
The drain valves of the sight glasses should be small ball valvevs.
Each compartment Has additional hole on the top of tank with 6"
diameter and cover.
Certification | Certificate of conformity,Material report,Accessories information |
Capacity | 100 bbl [16 m3] |
Service | Standard |
Working pressure | Atmospheric |
Working temperature | 32 to 200°F [0 to 93°C] |
Compartments | 2 |
Safety devices | 2 flame arrestors(4”150#) and bypass; |
Load factor | 14 psi |
Other | Two holes on the top of tank with 6" diameter and cover(ANSI B16.5 150# flange). |
Inlet | 3-in. LP Fig. 602 WECO Union (with 3”150# Ball Valves) |
Outlet | 3-in. LP Fig. 602 WECO Union (with 3”150# Ball Valves) |
Length | 199 in. [5.05 m] |
Width | 87 in.[2.20 m] |
Height | 95 in. [2.40 m] |
Weight (empty) | 10,000 lbm [4536 kg] |
| CHOKE MANIFOLD |
| Sour service: NACE MR0175 |
| Operating -20 to 250 deg F |
| Choke manifold shall have double block gate valves and bleed, to allow choke changes/replacements without interrupting the flow and for protection of the personnel and environment. |
| Chemical injection point across the choke for hydrate inhibition/mitigation. |
| 128/64ths " adjustable choke |
| 1 active + 1 backup |
| Full set of fixed beans in 2/64” increments from 8/64” to 48/64” and 4/64” increments from 48/64” to 128/64”. |
| 2 Bleed off ports upstream and downstream of choke bodies. |
| SURFACE SAFETY VALVE |
| Sour service: NACE MR0175 |
| Operating -20 to 250 deg F |
| Hydraulically fail safe gate valve, tied into ESD system. |
| DATA HEADER (Required 2ea) |
| 3" Fig 1502 10K Psi |
| Sour service: NACE MR0175 |
| Operating Temp: -20 to 250 deg F |
| Minimum number of ports. Compliant with double barrier philosophy : 6 |
| OIL MANIFOLD |
| 3"602 connection (Oil) and 4"602 connection (Gas): API SPEC 6A, ASME B16.34 (Valves associated with diverter manifolds) |
| Sour service: NACE MR0175 |
| Minimum 1440 psi rating |
| Temperature rating: 32 to 212 deg F |
| Outlets to burner boom. Valves to be interlocked or similarly mechanically controlled when ball valves supplied. |
| 5 way Manifold |
| GAS MANIFOLD |
| 4"602 connection (Gas): API SPEC 6A, ASME B16.34 (Valves associated with diverter manifolds) |
| Sour service: NACE MR0175 |
| Minimum 1440 psi rating |
| Temperature rating: 32 to 212 deg F |
| Outlets to burner boom. Valves to be interlocked or similarly mechanically controlled when ball valves supplied. |
| 3 way Manifold |
| HIGH PRESSURE PIPING |
| Minimum nominal size: 3" Fig 1502 connection |
| Minimum working pressure: 10K psi |
| Sour service: NACE MR0175 |
| Pipework with integral or welded hammer unions |
| Sufficient quantity / length of high pressure of 50mtr piping and 40pc 90 deg elbow to connect upstream package |
| LOW PRESSURE PIPING |
| Sufficient quantity / length of low pressure piping and elbow to connect downstream package, including vent and relieve lines |
| Sour service: NACE MR0175 |
| Pipework with integral or welded hammer unions |
| Well test pipework will be suitably restrained to anchor points corresponding to the maximum pressure to which it is tested |
About JC Wellhead
Jingcheng Petroleum Machinery Manufacturing Co.,Ltd was established in 2008, we are specialized in design and manufacturing of the oilfield wellhead equipment. We - YCJC are a registered supplier for CNPC, GWDC, CCDC in China.
YCJC also engaged in abroad marketing, through these years of efforts, our wellhead equipment is exported to many countries, such as Thailand, UAE, Iran, Brazil, Argentina, USA etc. and enjoyed good reputation from the customers.
The wellhead equipment we manufacture and supply include casing head, tubing head, casing spool, tubing spool, Gate valve, Choke valve, Check valve, X-mas tree, VR plug, Tubing hanger, casing hanger, Running tool, Wear bushing, spacer spool, flange adapter, union flange, Hammer union, Elbow, swivel joint, block cross, Block Tee, companion flange, instrument flange, weldneck flange, FC gate, FC seat, FC stem, API Clamp, API Clamp Hub
2 Compartment Oil Well Testing Equipment Gauge Tank 2x50bbl Atmospheric
Inquiry Cart
0