

Add to Cart
Introduction
Carbon Steel Vertical Bucket Conveyor For Grain / Fertilizer is a continuous conveying machine that vertically lifts materials by using a series of hoppers fixed uniformly on the unended traction members.
Carbon Steel Vertical Bucket Conveyor For Grain / Fertilizer is one of the most widely used vertical lifting equipment, this machine is suitable for medium, large and abrasive materials (such as limestone, cement clinker, gypsum, coal) vertical transport, material temperature in 250℃ below.
Carbon Steel Vertical Bucket Conveyor For Grain / Fertilizer consisits of hoppers, actuators, top and bottom rollers (or sprockets, tape, traction chains), tensioning devices and casings, etc.
Carbon Steel Vertical Bucket Conveyor For Grain / Fertilizer is designed for vertical elevating for bulk materials of powders, granular, small blocks, and abrasive rough materials, such as fly ash, slag, limestone, cement raw materials, cement clinker, cement, coal, dry clay, etc. The materials temperature is lower than 250℃ generally, elevating height reach to 40 meters.
Carbon Steel Vertical Bucket Conveyor For Grain / Fertilizer adopts
plate chain as the traction part, plate chain is made of high
strength alloy steel plate chain which is Wear resistant and
reliable material.
Model | Capacity (m3/h) | Bucket volume (L) | Bucket pitch (mm) | Bucket speed (m/s) |
NE15 | 16 | 2.5 | 203.2 | 29.8 |
NE30 | 31 | 7.8 | 304.8 | 30.1 |
NE50 | 60 | 14.7 | 304.8 | 30.1 |
NE100 | 110 | 35 | 400 | 31 |
NE150 | 165 | 52.2 | 400 | 31 |
NE200 | 220 | 84.6 | 500 | 30 |
NE300 | 320 | 127.5 | 500 | 30 |
NE400 | 441 | 182.5 | 600 | 30 |
Advantages
1. Large elevating capacity of 50~ 800m3/h.
2. Application widely, Not only can elevate general powder, the
small particle material, but also can elevate abrasive rough
materials.
3. Low driving power, low energy consumption, bucket elevator
adopts inflow feeding, gravity induced discharging, and use large
volume bucket, no returning and digging materials, less reactive
power.
Main Features
1. Good tightness, less environmental pollution.
2. Easy to operate and maintain with few wearing parts.
3. Low operating cost, very low operating cost due to less energy
saving and maintenance.
4. Reliable operation and advanced design principle ensure the
reliability and good airtightness of the whole machine.Less
environmental pollution.
5. Structure port model, high precision.The shell is flanged and
pressed in the middle, and then welded, with good rigidity and
beautiful appearance.
6. Small mechanical size, compared with the same amount of other
kinds of hoist, this hoist mechanical size is small.
7. Large conveying capacity, this series of elevator has more than
NE15~NE800 specifications.Lifting capacity range is 15~800m3/h.
8. Easy to operate, less maintenance and wearing parts.The
conveying chain is sleeve roller chain, which is used for vertical
lifting of all kinds of powder and lumps.