Withdrawal Force And Latching Verification Test Apparatus IEC 62196-1 For Charging Gun Test
Brand Name:Sinuo
Certification:Calibration Certificate(cost additional )
Model Number:SNQC1013C
Minimum Order Quantity:1 Set
Delivery Time:30 days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
Withdrawal Force And Latching Verification Test Apparatus IEC 62196-1 For Charging Gun Test
Product Information:
This withdrawal and insertion test equipment is designed and manufactured according to IEC 62196-1: 2022 clause 14.1.5, 14.1.6, 14.16 fig13, fig14, etc.
It is used to check whether the maximum force required to pull the charging gun out of the appliance socket is within the range specified by the standard. It is also used to check whether the maximum force required to insert the charging gun into the appliance socket is within the range specified by the standard.
Test principle:
Maximum pull-out force of socket: Apply the maximum pull-out force specified in the standard (the total force of the main weight, additional weight, hook (clamping device) and test plug) to the test plug, and the plug should come out of the socket.
The force of the charging gun inserted into the socket: Hold the charging gun vertically downward, place the main weight required by the standard on the charging gun, and then use a 0.8kg weight to fall freely from a height of 5cm to impact the main weight. The charging gun should be inserted into the socket to the required position of the contact
Structure features:
This device consists of a clamping device installed under the top plate A, a main weight F, an supplementary weight G and a test plug C. The frame of this device is compatible with Figure 13 and 14 of IEC 62196-1:2022, can achieve the latching device test and a withdrawal & insertion force test.
Technical Specifications:
| Test station | Single station |
| Test contents | 14.1.5:Withdrawal force 14.1.6: Verification of the latching device 16.16:Withdrawal force & Insertion force |
Required gauges (Optional) | Made of S136, the pin is the minimum standard size, with a tolerance of +0.010 mm, a spacing of ±0.05 mm, and a finish of 0.8 um. The gauges are optional, not included in this test device, please specify which gauge will be needed as different countries use different types of connectors. |
| Latching device test | |
| Standard figure | |
| Test holding time | 60s, the jack drives the pallet to lift the weight to achieve the holding time |
| Test times | 4 times, once in each 90° direction around the horizontal axis, manually |
| Test load selection | |
| Load weight configuration | 165: 148.5N main weight x1 + 16.5N supplementary weight x1; 300N: 270N main weight x1 + 30N supplementary weight x1; 440N: 396N main weight x1 + 44N supplementary weight x1; 660N: 594N main weight x1 + 66N supplementary weight x1; 750N: 675N main weight x1 + 75N supplementary weight x1; Note: The weight of the main weight includes the weight of the hook, and the weight is realized by superposition and combination |
| Withdrawal & Insertion force | |
| Standard figure | |
| Insertion force test layout | |
| Insertion force weight configuration | Main weight of AC charging gun: 9.2kg Main weight of DC charging gun: 13.2kg Additional weight: 0.8kg Note: The main weight includes the weight of the clamp and the guide rod. The total weight is realized by stacking and combining of the weights. |
| Test | During the test, the locking device needs to be opened |
| Withdrawal force test arrangement | As above figure 13 |
| Withdrawal weight configuration | AC charging gun: 100N (90N+10N) DC charging gun: 140N (126N+14N) 1.0kg |
Withdrawal Force And Latching Verification Test Apparatus IEC 62196-1 For Charging Gun Test
Inquiry Cart
0