Hot Flaming Oil Flammability Test Chamber IEC 62368-1 Thermal Combustion Oil Test Device

Hot Flaming Oil Flammability Test Chamber IEC 62368-1 Thermal Combustion Oil Test Device

Product Information:

The flammability test of thermal combustion oil test device is designed and manufactured according to the standard requirements of IEC 62368-1: 2018 Annex S.3, IEC60950-1:2005 and IEC60950-1:2013 clause 4.6.2, Annex A.3 and etc. It is used to simulate that the flammable liquids used in electrical and electronic equipment may ignite due to overheating and leak out of the fire protection enclosure, causing electrical fires and endangering the reliable operation of the equipment and personal safety.

The test process are to fill 10mL of flammable liquid with the specified performance (average calorific value 38MJ/L, mass per unit volume between: 0.845g/mL～0.865g/mL, flash point: 43.5℃~93.5℃) in the metal ladle, after heating to the distillate fuel oil’s ignition point and burning 1mim, the motor drives the spoon to rotate at a certain height (100mm) and a certain flow rate (1mL/s), and then steadily pour the flammable liquid on the center of the opening of the sample (fire protection enclosure). The fire protection performance of the test product is evaluated by whether the ignition bedding at the specified distance (50mm) and with the specified density (40g/m2) under the test product is ignited.

Features:

Oil Container: The apparatus includes a container that holds the hot oil or flammable liquid during the test. The container is typically made of a heat-resistant material and is designed to safely contain the liquid during the testing process.
Heating Element: A heating element is used to heat the oil in the container to a specified temperature. The temperature setting is controlled to simulate the conditions of exposure to hot oils or liquids that materials may encounter in real-world scenarios.
Sample Holder: A sample holder or test chamber is used to secure the test samples during the test. The samples are typically placed in or above the hot oil bath to expose them to the heat and potential flame spread.
Ignition Source: In some cases, a controlled ignition source, such as a gas burner or flame source, may be used to simulate a flame exposure scenario during the test. This helps evaluate the material's response to direct flame contact in addition to heat exposure.
Temperature Control: The apparatus incorporates temperature control mechanisms to maintain the oil at the desired test temperature throughout the test duration. This ensures consistency and repeatability in test conditions.
Safety Features: Safety features, such as thermal insulation, protective shields, and emergency shutdown controls, are important components of the device to ensure the safety of operators and prevent accidents during testing.
Data Recording and Analysis: Some Hot Flaming Oil Test Devices may include data logging capabilities to record temperature profiles, test durations, and other relevant parameters. This data can be used for analysis and documentation of test results.

Technical parameters:

Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing laboratories, materials flame-retardant laboratories, basic general testing equipment, etc.), Sinuo aims to provide clients with complete laboratory construction, system integration, R&D, rectification and after-sales service, and strive to be the leader of one-stop service for laboratory construction in the field of electrical appliance testing.

Sinuo products are composed of all kinds of testing equipments as per standards of IEC/ BS/ EN/VDE/UL/ ISO..., such as household appliances testing equipment, energy efficient testing laboratories and comprehensive performance test system for household appliances, battery testing equipment, automotive testing equipment, luminaries testing equipment,IP code testing equipment, environmental test chamber, flammability test chambers, EMC testing equipment and etc.

Sinuo employees include a highly trained staff of engineers for sales and service, that are committed to offer satisfactory products and prompt service to all home and abroad customers.

Sinuo cooperate with many research institutions and schools to enable our techincal capacities. Sinuo has two own factories, one is in Guangzhou, the other is in Dongguan, and authorized agents and representative offices in Korea, South Africa, Egypt,Pakistan and Philippines.

Sinuo combines all the R/D and production advantages, contributes to provide perfect, high-end and systematic electrical appliance testing laboratory solutions, products and services for corporate customers, universities and third-party laboratories. Our clients include Bureau Veritas, CSA, Intertek, TUV Rehiland, TUV SUD, SGS, etc.