Medical Material Tester ANSI/AAMI-EC53 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN1112M
Minimum Order Quantity:1
Delivery Time:30 Days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
ANSI/AAMI-EC53: 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief
Standard & Clauses:
AAMI-EC53-1998
ANSI/AAMI-EC53:2013/(R)2020 “ECG trunk cables and patient leadwires”
Specimen Range, Application, Principle, Structure and Use Environment:
Samples and Restrictions: EGA trunk cables and patient leadwires
Application: Used to test the bending resistance of EGA trunk cables and patient leadwires when the power cord enters the appliance. To verify its reliable performance.
Principle: Use a motor to drive the fixture to flex the sample. Apply current to the soft wire to make the sample flex left and right at a certain speed and angle of ±90°. And clamp the weight at a position 6 inches away from the lead outlet end of the sample. The test will automatically stop when the equipment reaches the test times or the soft wire is short-circuited.
Equipment structure and schematic diagram:
The equipment is driven by a servo motor, and the fixture is installed in the center. And the eccentricity is adjustable. When clamping the sample, the flexing axis and the point where the cord enters the appliance can coincide as much as possible. This results in minimal lateral displacement of the cord and load.
Equipment dimensions: approximately: 800×800×1300 (mm) W×H×D, equipment weight: 130kg
Technical Parameters:
| Test station | Single |
| Electrical control method | PLC and 7-inch touch screen |
| Drive mode | Servo motor drive |
| Sample clamping method | Mechanical clamping, the position of clamping point is adjustable |
| Flexing angle | 0-360° adjustable arbitrarily (can be preset ±30°, ±45°, ±60°, ±90°) |
| Flexing rate | 0-60 times/min, variable frequency speed regulation |
| Flexing times | 0~999999 Can be preset and set according to standard table 1 requirements |
| Load weight | 1. 0.23kg (±5%), 1 piece (weight tray). 2. 0.1kg, 10 pieces, (add weight, stack weight). Achieve standard 0.0072*π*d² (±5%) |
| Test judgment | 1. Short circuit judgment 2. Disconnection judgment |
Medical Material Tester ANSI/AAMI-EC53 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief
Inquiry Cart
0