IEC 60245-1 Torvature Testing Machine 1 0.33m/S For Finished Flexible Cables
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN2302
Minimum Order Quantity:1
Delivery Time:30 days
Payment Terms:L/C, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
IEC60245-1 Torvature Testing Machine 1 0.33m/S For Finished Flexible Cables
Technical Characteristics:
Power Supply | 3 phase 5 wires 220VAC/ 60 Hz or 380V/50Hz |
Load Current | 0.5~25A, adjustable |
Load Voltage | Line-to-line voltage 10~400V adjustable |
Testing speed | 0.33m/s |
Testing distance | 1000±20mm |
Suitable cores | 2-18 |
Nominal cross-sectional area | 0.2~4mm2 |
Diameter of pulleys | 60, 80, 120, 160, 200mm |
Test weights | 2*0.5kg with hook, 2*0.5kg with hole, 6*1kg with hole, 2*6kg with hook |
Equipment overview:
This test instrument can meet the test requirements of domestic and
international standards and can be widely used. It has a precision
digital meter, so it can accurately measure smaller or larger
current voltages. The pulley replacement method is simple and
convenient. The test equipment adopts chain drive mechanism with
stable performance and low noise.
The tester is designed and manufactured in accordance with IEC 60227.2 Article 3.1, Figure 1, IEC 60245.2 Article 3.1, Figure 1, IEC60245-1 Article 5.6.3.1 and other standards. It meets the requirements of the relevant standards for mechanical strength bending test of rubber-plastic wires and cables. This test does not apply to flexible cables with a nominal cross-sectional area of the core greater than 4mm2 , and cables with more than 18 cores and more than two concentric layers.
How to installand adjustof the pulleys?
- Select the appropriate pulley according to the diameter of the test wire/cable and the number of wire/cable cores.
- Installation: Loosen and remove retaining nut, pull out pulley, replace pulley, install retaining nut and tighten.
- Adjustment: Release the screws of 1, 2, A, B pulleys, then adjust pulleys’ positions, to make segments of the sample are horizontal and parallel to each others. Shown as below pictures:
IEC 60245-1 Torvature Testing Machine 1 0.33m/S For Finished Flexible Cables
Inquiry Cart
0