China Categories
English
Home /Measuring & Analysing Instrument Processing Services /

IEC 60061-3 E14 E26 E27 E39 E40 Lampholders Go Not Go Gauge Confirm The Dimensions Of Socket

IEC 60061-3 E14 E26 E27 E39 E40 Lampholders Go Not Go Gauge Confirm The Dimensions Of Socket

Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN993
Minimum Order Quantity:1
Delivery Time:30 Days
Payment Terms:T/T
Contact Now

Add to Cart

Verified Supplier
Location: Guangzhou Guangdong China
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times: within 36 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

IEC 60061-3 E14 E26 E27 E39 E40 Lampholders Go & Not Go Gauge Confirm The Dimensions Of Socket


Product Overview For E14 E26 E27 E39 E40 Lampholders Go & Not Go Gauge:


The lampholder “Go” and “Not Go” gauges are manufactured according to relative requirements of IEC 60061-3, they are required by UL 496 2013 clause 5.2.4.2.

These lampholder gauges are used to check whether the dimensions and shapes of the lampholders meet standard requirements by using the lampholders interchangeable size gauges.

E14, E26, E27, E39, and E40 are the size specifications of the screw socket, which are used to specify the standard for connecting the bulb to the socket. And "Go and Not Go Gauges" (also known as "GO/NO-GO Gauges") is a measuring tool used to check whether the dimensions of the product meet the requirements.

During the manufacture and assembly of screw sockets, a GO/NO-GO gauge is used to confirm that the dimensions of the socket are within specification. The GO gauge is used to check the maximum allowable size of the lampholder, while the NO-GO gauge is used to check the minimum allowable size. A lampholder is dimensionally acceptable if it passes the GO gauge but not the NO-GO gauge. If the lampholder fails the GO gauge, or if it is able to pass the NO-GO gauge, then the lampholder size fails.

By using a GO/NO-GO gauge, you can ensure that the screw base is sized to the standard, ensuring a safe and secure bulb connection. This is very important for both luminaire manufacturers and users, as improper sizing can lead to bulbs that cannot be installed or connected unstable, thereby affecting lighting effects and safety performance.


Technical Parameters For E14 E26 E27 E39 E40 Lampholders Go & Not Go Gauge:


Material: made of die steel S136 material, anti-corrosion, wear-resistant and high accuracy.

E14, E26, E27, E39 and E40 lampholders “Go”/”Not Go” Gauges, total 10 pieces:


TypeDescriptionData Sheet NumberQTY
E14“Go” gauge7006-25-71 PC
“Not Go” gauge7006-26-41 PC
E26“Go” gauge7006-25B-21 PC
“Not Go” gauge7006-26A-21 PC
E27“Go” gauge7006-25A-21 PC
“Not Go” gauge7006-26-41 PC
E39“Go” gauge7006-24E-11 PC
“Not Go” gauge7006-26-41 PC
E40“Go” gauge7006-25-71 PC
“Not Go” gauge7006-26-41 PC
Test Procedures and Operation For E14 E26 E27 E39 E40 Lampholders Go & Not Go Gauge:

Please refer to the relevant standard requirements of IEC 60061-3.

Take E27 lampholder Not Go Gauge for example:

IEC 60061-3: 7006-26-4 E27 Not Go Gauges for Screw Threads of Lampholders

The drawing is intended only to illustrate the essential dimensions of the gauge.

For details of screw thread of lampholders E10, EP10, EY10, E14, E27, E39 and E40, see sheets 7004-22, 7005-30, 7005-7, 7004-23, 7004-21, 7005-24A and 7004-24 respectively.

PURPOSE: To check the maximum minor diameter of the screw thread, dimenaion D1, of lampholders E10, EP10, EY10, E14, E27, E39 and E40.

TESTING: The screw thread of the lampholder shall be assumed to be correct if the gauge does not enter by its own weight so far that the thread protrudes beyond surface T.

Sinuo can supply grand range of gauges, including lamp gauges, plug and socket-outlet gauges, etc. Our gauges are made of high quality die steel, anti-corrosion, wear-resistant and high accuracy, which can ensure our gauges pass the third party calibration.

China IEC 60061-3 E14 E26 E27 E39 E40 Lampholders Go Not Go Gauge Confirm The Dimensions Of Socket supplier

IEC 60061-3 E14 E26 E27 E39 E40 Lampholders Go Not Go Gauge Confirm The Dimensions Of Socket

Inquiry Cart 0